Bedienungsanleitung Scheppach EA1700H Herkules (Seite 19 von 76) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Finnisch)

781989

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

GB | 19

• All safety and hazard notices on the machine must

be kept in a completely legible condition.

• Be aware of environmental conditions at the work

place.

• Ensure sufcient lighting at and around the machi-

ne.

• Never work in closed or badly-ventilated rooms.

• When the motor is running, be aware of fumes.

These may be odourless and invisible.

• When the weather is bad, the ground is uneven or

in the event of slopes, ensure secure footing.

• When working with the machine, all protective de-

vices and covers must be attached.

• Keep people, especially children, away from the

working environment.

• Prevent unauthorised people from coming in con-

tact with the machine.

• Ensure that children do not have access to the ma-

chine when it is not in use.

• Always pay attention and concentrate on what you

are doing. Be sensible at work. Do not use the po-

wer tool when you are not concentrating.

• Do not work with the machine when you are tired or

under the inuence of alcohol, drugs or medication.

• The operator must be at least 18 years old. Appren-

tices have to be at least 16 years old and may only

work with the machine under supervision.

• People working with the machine must not be dis-

tracted.

• Store the machine safely so that nobody can get

injured by the machine or put it into operation.

• Only ever use the machine according to its inten-

ded purpose.

• Do not use power tools where there is a risk of re

or explosions.

• Wear appropriate work clothing that does not hin-

der your work.

• During work, wear hearing protection and goggles.

• Wear safety boots with steel toe caps, steel soles

and a non-slip prole.

• Wear tough work gloves.

• The machine‘s safety devices must not be removed

or made unusable.

• Carry out work such as retooling, adjusting, measu-

ring and cleaning only when the motor is switched

off.

• Installations, repairs and maintenance must be car-

ried out by specialists.

• All protective and safety equipment must be re-

attached immediately after completing repairs and

maintenance.

• Always turn off the motor before xing faults.

• Look out for damaged parts and protective devices.

• Faulty parts must be repaired or replaced by an au-

thorised specialist.

• Only ever use original spare parts. Using spare

parts that are not original can be a risk for people

or cause material damage.

• The machine may only be used for its intended pur-

pose. The user alone is responsible for unintended

use of the machine. The manufacturer is not liable

in the event of unintended use.

Safety notices for petrol-powered machines

• Internal combustion engines are a particular dan-

ger during operation and refuelling.

• Always observe warning notices and additionally

specied safety instructions.

• Non-compliance can lead to severe and even lethal

injuries.

• When the motor is running, be aware of fumes.

These may be odourless and invisible. The motor

fumes contain toxic carbon monoxide. Being in

an environment with carbon monoxide can lead to

unconsciousness and death.

• Never operate the machine close to an open ame.

• Do not smoke during refuelling.

• Do not spill fuel during refuelling.

• Always close the tank ller cap properly after re-

fuelling.

• Do not touch the exhaust when the motor is running

(risk of burning).

• Do not touch the spark plug cap when the motor is

running (electric shock).

• Leave the machine to cool down before carrying

out modications or repairs and always remove the

spark plug cap.

• Do not use petrol or solvents for cleaning. Risk of

explosion!

Refuelling:

Note: Two-stroke motor, mixing ratio 1:40

FOLLOW THE SAFETY PRECAUTIONS!

Be careful and cautious when handling fuels.

• The engine must be switched off!

• Thoroughly clean the area around the caps, to pre-

vent dirt from getting into the fuel or oil tank.

• Unscrew the cap and ll the tank with fuel (fuel/oil

mixture) or chain oil as the case may be. Fill up to

the bottom edge of the ller neck.

• Be careful not to spill fuel or chain oil!

• Tighten the tank cap as far as it will go.

• After refuelling, clean the tank cap and surround-

ings and make sure the cap is sealed!

NOTE:

Always pre-mix the intended oil volume in half of the

fuel volume to produce the fuel/oil mixture and then

add the remaining fuel volume. Shake the nished

mixture well before lling the mixture into the auger.

It is not wise to add more engine oil than speci-

ed to ensure safe operation. This will only result

in a higher production of combustion residues

which will pollute the environment and clog the

exhaust channel in the cylinder as well as the

mufer. In addition, fuel consumption will rise

and performance will decrease.

The storage of fuel

Fuels have a limited storage life. Fuel and fuel mix-

tures age through evaporation, especially at high

temperatures. Aged fuel and fuel mixtures can cause

starting problems and damage the engine.Purchase

only that amount of fuel, which will be consumed over

the next few months. At high temperatures, once fuel

has been mixed it should be used up in 6-8 weeks.

Store fuel only in proper containers, in dry, cool,

secure locations!

Avoid skin and eye contact!

Scheppach EA1700H Herkules Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info