Bedienungsanleitung Scheppach GP1000 Jet LCD (Seite 23 von 88) (Deutsch, Englisch, Französisch, Finnisch)

781426

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 23

• Only use the device for the purpose

specied in these original operating in-

structions.

• You are responsible for safety in the

work area.

• If the connection cable of this unit is

damaged, it must be replaced by the

manufacturer or their service depart-

ment or a similar qualied person in or-

der to avoid hazards. The voltage of

230 volts AC indicated on the type plate

of the pump must correspond to the

mains voltage present.

• Never lift, transport or fasten the pump

by the mains cable.

• Make sure that the electrical plug con-

nections are located in a ood-proof ar-

ea or are protected against moisture.

• Before any work on the pump, pull out

the mains plug.

• Ensure that the pump is not exposed to

a direct water jet.

• The operator is responsible for compli-

ance with local safety and installation

regulations (ask a qualied electrician if

necessary).

• The user must implement suitable

measures (e.g. installation of an alarm

system, reserve pump or similar) to pre-

vent consequential damage caused by

ooding of rooms in the event of pump

faults.

• If the pump fails, repair work may only

be carried out by a qualied electrician

or by customer service.

• Only use original spare parts.

• The pump must never be allowed to run

dry or be operated with a fully closed

suction line. Damage to the pump

caused by dry running will invalidate

the manufacturer’s warranty.

5. Safety notes

• This device is not designed to be op-

erated by persons (including children)

with impaired physical, sensory or men-

tal capabilities, or who have insu󰀩cient

experience and/or insu󰀩cient knowl-

edge unless they are being supervised

by a person who is responsible for their

safety or they are receiving instruction

about how this device is to be used.

Children should not be left unattended,

to ensure they do not play with the de-

vice.

• Keep packaging lms out of the reach

of babies and children. Risk of su󰀨oca-

tion!

• The user is responsible for third parties

in the working area of the device.

• Prior to commissioning, it must be en-

sured by means of expert testing that

the required electrical protective meas-

ures are in place.

• m Warning! The pump may only be

used in and around stagnant water, gar-

den and swimming ponds with a resid-

ual current circuit breaker with a rated

residual triggering current of up to 30

mA (per VDE 0100 parts 702 and 738).

• The pump is not suitable for use in

swimming pools, paddling pools of any

kind and other waters where persons or

animals may be present during opera-

tion.

• Operating the pump while humans or

animals are in the danger zone is not

permitted. Ask your electrician!

• Always carry out a visual inspection of

the unit before use. Do not use the unit

if safety devices are damaged or worn

out. Never disable safety devices.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach GP1000 Jet LCD Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info