Bedienungsanleitung Scheppach HA200S (Seite 10 von 44) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Schwedisch)

782132

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

similarly qualied person. The machine is not

suitable for extracting combustible liquids or

dust.

Intended Use m

• The machine is designed and built according

to the state-of-the-art and the safety-related

standards. Nevertheless, the use of the

machine might involve risks such as personal

injury, danger to life for the user or third

parties, or damage to the machine and other

material property.

• The machine is to be used only in a

technically awless condition as well as in

accordance with the manufacturer’s inst-

ructions and in a safety and risk-conscious

manner while adhering to the operating

instructions! In particular, failures which may

impair the safety must be resolved immedia-

tely (by you or an expert)!

• The extraction unit is used to suck off

splinters or chips which are created while

processing wood or wood-based materials.

• Please note that our devices are not inten-

ded for commercial and industrial use or for

use in craftsman’s businesses. We do not

assume any liability if the device is used in

commercial or industrial companies or in

craftsman’s businesses.

• Check the lter for damages at regular inter-

vals. Replace damaged lters!

• Do not suck in any foreign objects, such

as screws, nails, pieces of plastic or wood,

when using the cleaning jets.

• The machine may be operated only with

original parts and original accessories of the

manufacturer.

• Sucking up sawdust and wood chips in the

commercial sector is not permitted.

• Any other use above or beyond this is consi-

dered improper use. The manufacturer is not

liable for damages resulting from this. The

user shall bear this risk alone.

• The safety, work and maintenance instruc-

tions of the manufacturer as well as the

dimensions indicated in the Technical Data

section must be adhered to.

• The relevant accident prevention regulations

and other generally recognised safety stan-

dards must be observed.

• The machine may be used, maintained or

repaired only by persons who are familiar

with the machine and the risks involved.

Unauthorised modications on the machine

exclude any liability of the manufacturer for

resulting damages.

• The machine may be used only with the

original accessories of the manufacturer.

• The suction device is used for sucking up,

blowing off and blowing out substances that

are not dangerous to health.

• Don‘t use the suction device for sucking up

liquids.

• Do not suck in any hot or burning dusts.

• Do not suck in any dusts that are dangerous

to health (e.g. asbestos)

• Keep the suction device away from humidity

and rain.

Remaining risks m

The machine is built according to the state

of the art and the recognised safety stan-

dards. However, when working on and with

the machine, residual risks may arise.

• Health hazards through wood chips. Always

wear personal protective equipment such as

eye protection and dust masks.

• When closing or replacing the dust collec-

ting bag, you might breathe in dust. If you

do not observe the notes in the operating

instructions regarding the disposal (e.g. use

of dust masks P2), you may breathe in dust.

• Health hazards through noise. When you

work on and with the machine, the permit-

ted noise level is exceeded. Always wear

personal protective equipment such as ear

protection.

• Danger through electrical current, if impro-

per connection cables are used.

• Furthermore, in spite of all precautions

there might be remaining risks that are not

obvious.

• Remaining risks can be reduced if the

sections “Safety instructions” and “Intended

use” as well as the operating instructions

are observed in their entirety.

Equipment

1 Case

2 On/off switch

3 Clamp for case cover

4 Carrying handle

5 Power cable

6 Suction hose

7 Suction/blowing nozzle

8 Suction nozzle, at

9 Borehole-suction nozzle

10 Lid for dust bag

11 Dust bag

12 Dust lter

13 Clamping bracket

14 Suction nozzle

15 Suction grating

16 Connector for suction

17 Connector for blowing

Assembly

■ INSERTING/REPLACING THE DUST BAG, FIG. 2/3

Open both clamps (3) and fold the case cover

backwards.

Open the lid for the dust bag (10), press the

clamping bracket (12)

on the dust bag and push it over the suction

nozzle.

Close the lid again until it clicks into place.

When you empty a full dust bag, clean the

dust bag chamber with a moist cloth or brush

before you inserting it again.

Pass the connection cable through the notch

(a) on the front. Close the case cover and lock

it with both clamps.

■ SUCTION FUNCTION FIG. 4-7

Remove the power plug for all

conversions.

When using the suction function, always

insert a dust bag. The connection nozzle (14)

must be inserted on the side of the dust bag.

(16)

Insert the suction grating with lter on the

opposite side.

Make sure both parts click into place.

Insert the suction hose (6) with the lug into

the connection nozzle (14) and lock in it place

by rotating it slightly.

Attach a jet nozzle onto the suction hose;

connect the mains plug and press the on

button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HA200S Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info