Bedienungsanleitung Scheppach HC51V (Seite 71 von 104) (Deutsch, Englisch, Französisch, Italienisch, Polnisch)

781611

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

71GB

• The supervisory authority may enforce essential

control measures in individual cases.

• A pressure vessel is not allowed to be used if it has

faults or deciencies that can endanger workers

or third parties.

• Check the pressure vessel for signs of rust and

damage each time before using. Do not use the

compressor with a damaged or rusty pressure

vessel. If you discover any damage, then please

contact the customer service workshop.

Do not lose these safety instructions.

6. TECHNICAL DATA

Mains connection 230 V ~ / 50 Hz

Motor rating W 1500

Operating mode S3 25%

Compressor speed 4000 min-1

Pressure vessel capacity

(in liters) 50

Operating pressure approx. 10 bar

Theoretical intake capacity

(l/min) approx. 220

Sound power level LWA 97 dB(A)

Uncertainty KWA 2.92 dB

Protection type IP20

Weight of the unit in kg 22.5

Max. altitude

(above mean sea level) 1000 m

The noise emission values were measured in ac-

cordance with EN ISO 3744.

Wear hearing protection.

The effects of noise can cause a loss of hearing.

7. Before starting the equipment

Before you connect the equipment to the mains sup-

ply make sure that the data on the rating plate are

identical to the mains data.

• Check the equipment for damage which may have

occurred in transit. Report any damage immedi-

ately to the transport company which was used to

deliver the compressor.

• Install the compressor near the point of consump-

tion.

• Avoid long air lines and supply lines (extension

cables).

• Make sure that the intake air is dry and dustfree.

• Do not install the compressor in a damp or wet

room.

• The compressor may only be used in suitable

rooms (with good ventilation and an ambient tem-

perature from +5 °C to 40 °C). There must be no

dust, acids, vapors, explosive gases or inamma-

ble gases in the room.

ADDITIONAL SAFETY INSTRUCTIONS

Safety instructions for working with compressed

air and blasting guns

• The compressor pump and lines can become very

hot during operation. Touching these parts will burn

you.

• The air which is sucked in by the compressor must

be kept free of impurities that could cause res or

explosions in the compressor pump.

• When releasing the hose coupling, hold the hose

coupling piece with your hand. This way, you can

protect yourself against injury from the rebound-

ing hose.

• Wear safety goggles when working with the blow-

out pistol. Foreign bodies or blown off parts can

easily cause injuries.

• Do not blow at people with the blow-out pistol and

do not clean clothes while being worn. Risk of in-

jury!

Safety information for paint spraying

• Do not process any paints or solvents with a ash

point below 55° C. There is a risk of explosion!

• Do not heat up paints or solvents. There is a risk

of explosion!

• If hazardous liquids are processed, wear protec-

tive lter units (face guards). Also, adhere to the

safety information provided by the manufacturers

of such liquids.

• The details and designations of the Ordinance on

Hazardous Substances, which are displayed on the

outer packaging of the processed material, must

be observed.

• Additional protective measures are to be under-

taken if necessary, particularly the wearing of suit-

able clothing and masks.

• Do not smoke during the spraying process and/or

in the work area. There is a risk of explosion! Paint

vapors are easily combustible.

• Never set up or operate the equipment in the vicin-

ity of a re place, open lights or sparking machines.

• Do not store or eat food and drink in the work area.

Paint vapors are harmful to your health.

• The work area must exceed 30 m3 and sufcient

ventilation must be ensured during spraying and

drying. Do not spray against the wind. Always ad-

here to the regulations of the local police authority

when spraying combustible or hazardous materi-

als.

• Do not process media such as white spirit, butyl

alcohol and methylene chloride with the PVC pres-

sure hose. These media will destroy the pressure

hose.

Operating pressure vessels

• You must keep your pressure vessel in good work-

ing order, operate the vessel correctly, monitor the

vessel, carry out necessary maintenance and re-

pair work immediately and meet the relevant safety

precautions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HC51V Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info