Bedienungsanleitung Scheppach HCE1450 (Seite 21 von 28) (Deutsch, Englisch)

782031

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 21

10. Electrical connection

The electrical motor installed is connected and

ready for operation. The

connection complies with the applicable VDE and

DIN provisions. The customer‘s mains connec-

tion as well as the extension cable used must

also comply with these regulations.

Damaged electrical connection cable

The insulation on electrical connection cables is often

damaged.

This may have the following causes:

• Passage points, where connection cables are

passed through windows or doors.

• Kinks where the connection cable has been im-

properly fastened or routed.

• Places where the connection cables have been cut

due to being driven over.

• Insulation damage due to being ripped out of the

wall outlet.

• Cracks due to the insulation ageing.

Such damaged electrical connection cables must not

be used and are

life-threatening due to the insulation damage.

Check the electrical connection cables for damage

regularly. Make sure that the

connection cable does not hang on the power net-

work during the inspection.

Electrical connection cables must comply with the

applicable VDE and DIN provisions. Only use con-

nection cables with the marking “H05VV-F“.

The printing of the type designation on the connec-

tion cable is mandatory.

AC motor

• The mains voltage must be 230-240 V~.

• Extension cables up to 25 m length must have a

cross section of 2.5 mm2 .

Connections and repairs of electrical equipment may

only be carried out by an

electrician.

Please provide the following information in the event

of any enquiries:

• Type of current for the motor

• Machine rating plate

high-pressure cleaner switches on.

• Releasing the trigger (B) switches off the device.

• The high pressure in the system is maintained.

• You can lock and unlock the trigger (B) of the spray

gun (10) by pressing the locking button (C).

• Locking the trigger (B) will ensure that the device is

not started unintentionally.

If there are leaks in the water system, switch the

device off immediately with the On/Off switch (6) and

disconnect the device from the mains. There is a risk

of electric shock! Check the connection of all water

connections and accessories.

Using the accessories (Fig. F):

Patio cleaner (12):

• The patio cleaner (12) is suitable for cleaning

ground and wall surfaces without splashing.

• Only activate the patio cleaner (12) once it is fully

in contact with the surface to be cleaned.

• Do not guide the patio cleaner (12) over free-stan-

ding corners or edges.

• The patio cleaner (12) is not suitable for scrubbing

or scraping

Cleaning agent container (13):

Use only cleaning agents that are expressly intended

for use in high-pressure

cleaners.

• The cleaning agent container (13) is suitable for

spraying cleaning agent e.g. onto cars.

• Fill the cleaning agent container (13) with the cor-

responding cleaner.

• The cleaning agent is dosed automatically in low-

pressure operation.

Variable nozzle (16):

• The variable nozzle (16) is suitable for cleaning

work on cars for example.

• The width of the water jet can be adjusted by tur-

ning the variable nozzle (16).

Pausing operation (Fig. A / F):

• Release the trigger (B) on the spray gun (10).

• With longer breaks, switch off the device with the

On/Off switch (5).

Finishing operation (Fig. A / F):

• Release the trigger (B) on the spray gun (10).

• Switch off the device with the On/Off switch (5).

• Turn off the water tap

• Press the trigger (B) on the spray gun (10) to allow

the residual pressure to dissipate.

• Pull out the mains plug and wind the mains cable

(2) onto the cable winding cleat (3).

• Disconnect the high-pressure cleaner from the

water supply.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HCE1450 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info