Bedienungsanleitung Scheppach HCE1650 (Seite 21 von 100) (Deutsch, Englisch, Französisch, Italienisch)

782030

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB І 21

Service information

Please note that the following parts of this product

are subject to normal or natural wear and that the fol-

lowing parts are therefore also required for use as

consumables.

Wear parts*: belt, hose, lance, Nozzles and attach-

ments, air lter, seals

* Not necessarily included in the scope of delivery!

Cleaning the nozzle (Fig. 1)

Use the supplied wire (15) to clean clogged nozzles.

11. Disposal and recycling

The equipment is supplied in packaging to prevent it

from being damaged in transit. The raw materials in

this packaging can be reused or recycled. The equip-

ment and its accessories are made of various types

of material, such as metal and plastic. Never place

defective equipment in your household refuse. The

equipment should be taken to a suitable collection

center for proper disposal. If you do not know the

whereabouts of such a collection point, you should

ask in your local council ofces.

Old devices must not be disposed of with house-

hold waste!

This symbol indicates that this product must

not be disposed of together with domestic

waste in compliance with the Directive

(2012/19/EU) pertaining to waste electrical and

electronic equipment (WEEE). This product must be

disposed of at a designated collection point. This can

occur, for example, by handing it in at an authorised

collecting point for the recycling of waste electrical

and electronic equipment. Improper handling of

waste equipment may have negative consequences

for the environment and human health due to poten-

tially hazardous substances that are often contained

in electrical and electronic equipment. By properly

disposing of this product, you are also contributing

to the effective use of natural resources. You can

obtain information on collection points for waste

equipment from your municipal administration, pub-

lic waste disposal authority, an authorised body for

the disposal of waste electrical and electronic equip-

ment or your waste disposal company.

Please provide the following information in the event

of any enquiries:

• Type of current for the motor

• Machine data - type plate

• Before you connect the appliance to the mains sup-

ply make sure that the data on the rating plate are

identical to the mains data.

• If you use any extension cables, make sure that

they are suitable for outdoor use and have large

enough wires:

1-10m: 1,5mm2

10-30m: 2,5mm2

• Plug the mains plug on the power cable into the

mains socket outlet.

• The product meets the requirements of EN 61000-

3-11 and is subject to special connection condi-

tions. This means that use of the product at any

freely selectable connection point is not allowed.

• Given unfavorable conditions in the power sup-

ply the product can cause the voltage to uctuate

temporarily.

• The product is exclusively intended for use at con-

nection points that have a continuous current-car-

rying capacity of at least 100 Amper phase.

• As the user, you are required to ensure, in consul-

tation with your electric power company if neces-

sary, that the connection point at which you wish

to operate the product meets the specied re-

quirements.

10. Maintenance

m Warning! Prior to any adjustment, maintenance

or service work disconnect the mains power plug!

General maintenance measures

• Keep all safety devices, air vents and the motor

housing free of dirt and dust as far as possible.

Wipe the equipment with a clean cloth or blow it

down with compressed air at low pressure.

• We recommend that you clean the equipment im-

mediately after you use it.

• Clean the equipment regularly with a damp cloth

and some soft soap. Do not use cleaning agents

or solvents; these may be aggressive to the plastic

parts in the equipment. Ensure that no water can

get into the interior of the equipment.

Long periods of nonuse (electric pump)

If the machine is going to be stored for longer peri-

ods of time (i.e. over 3 months) in a room where frost

could develop, it is recommended that the machine

be lled with an antifreeze solution (similar to the

antifreeze solutions used for vehicles).

When the device is not used for an extended period

of time, lime deposits begin to form in the electric

pump, which in turn can lead to starting difculties.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HCE1650 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info