Bedienungsanleitung Scheppach HCE2600 (Seite 18 von 84) (Deutsch, Englisch, Französisch)

782033

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

18 | GB

• Turn o󰀨 the appliance and remove the mains plug

prior to any care and maintenance works.

• Repair work and work on the electrical components

may only be performed by an authorised customer

service.

m WARNING

• The appliance may only be connected to an electric

supply that has been installed by an electrician in

accordance with IEC 60364.

• The appliance may only be connected to alternat-

ing current. The voltage must correspond with the

type plate of the appliance.

• Safety class I - Appliances may only be connected

to sockets with proper earthing.

• For safety reasons, we recommend that you oper-

ate the appliance only via a residual current device

(max. 30 mA).

• An unsuitable electrical extension cable can be

hazardous. Only use an electrical extension ca-

ble which has been approved and labelled for this

purpose and has an adequate cable crosssection

outdoors:

1–10 m: 1.5 mm2; 10–30 m: 2.5 mm2

• Always fully unreel the extension cable from the

cable drum.

Warning! This electric tool generates an electro-

magnetic eld during operation. This eld can im-

pair active or passive medical implants under certain

conditions. In order to prevent the risk of serious

or deadly injuries, we recommend that persons with

medical implants consult with their physician and the

manufacturer of the medical implant prior to operat-

ing the electric tool.

Safe handling

m DANGER

• The user must use the appliance as intended. The

person must consider the local conditions and must

pay attention to other persons in the vicinity when

working with the appliance.

• Check important components, such as high-pres-

sure hose, hand spray gun and safety installations,

for damage prior to every operation. Immediately

replace damaged components. Do not operate ap-

pliance with damaged components.

• High-pressure jets can be dangerous if improperly

used. The jet may not be directed at persons, ani-

mals, live electrical equipment or at the appliance

itself.

• The high-pressure jet must not be directed at other

persons or the user him-/herself to clean clothing

or footwear.

• Vehicle tyres/tyre valves are susceptible to dam-

age from the high-pressure jet and may burst. The

rst indication for this is a discolouration of the tyre.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial ap-

plications.

Our warranty will be voided if the machine is used

in commercial, trade or industrial businesses or for

equivalent purposes.

5. Safety Instructions for

High Pressure Cleaners

Please read these safety instructions and the original

operating instructions prior to the initial use of your

appliance. Proceed accordingly.

• Apart from the notes contained herein the general

safety provisions and rules for the prevention of ac-

cidents of the legislator must be observed.

• Warnings and notes that are attached on the appli-

ance provide important notes for the safe operation.

Hazard levels

m DANGER

• Pointer to immediate danger, which leads to severe

injuries or death.

m WARNING

• Pointer to a possibly dangerous situation, which

can lead to severe injuries or death.

m CAUTION

• Pointer to a possibly dangerous situation, which

can lead to minor injuries.

ATTENTION

• Pointer to a possibly dangerous situation, which

can lead to property damage.

Electric components

m DANGER

• Risk of electric shock.

• Never touch the mains plug and the socket with wet

hands.

• Check the power cord with mains plug for dam-

age prior to every use. Immediately have damaged

power cord replaced by an authorised customer

service / electrician. Do not operate an appliance if

the power cord is damaged.

• All current-conducting parts in the working area

must be protected against jet water.

• The mains plug and the coupling of an extension

cable must be watertight and must never lie in wa-

ter. Moreover, the coupling may never lie on the

ground. The use of cable reels that ensure that the

sockets are at least 60 mm above the ground is rec-

ommended.

• Make sure that the power cord or extension cable

is not damaged by running over, pinching, dragging

or the like. Protect the power cords from heat, oil,

and sharp edges.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HCE2600 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info