GB | 29
Keep this safety information in a safe place.
6. Technical data
Motor
Engine power kW 3,2
Rotation speed max. min-1 3600
Fuel tank 0,9
Fuel Gasoline (Un-
leaded)
Engine Type 4-stroke
air cooled
Starting System Recoil starter
Displacement ccm 173
Oil type 10W30
spark plug F7RTC
Water connection
Feed temperature max.°C 50
Feed volume min. l/min 9
Min. feed pressure MPa 0,2
Max. feed pressure MPa 1,0
Max. Inlet hose length m 15
Inlet hose diameter (inner diameter) min.
Ø 12,7 mm
Pump
Working pressure bar 180
Flow rate l/min 8,7
Oil quantity - pump liter 0,1
Detergent suck
ml/min 450
Max. recoil force of hand spray gun
N27
Detergent Only use cleaning agents
approved for high
pressure cleaners
Weight kg 26
Noise and vibration values
The noise and vibration values were determined ac-
cording to EN 60335-2-79 (EN ISO 3744 / ISO 5349-
1).
Sound pressure level LpA dB(A) 82,3
Uncertainty K dB 3
Sound power level LWA dB(A) 105
Uncertainty K dB 3
Vibration total values ah (triax vector sum) and
uncertainty K determined according to EN 60335-
2-79
Vibration emission value ah 1,02 m/s²
Uncertainty K 1,5 m/s²
Limit the noise and vibration to a minimum!
• Only use appliances which are in perfect working
order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
7. Functional description
Nozzle Extension with Quick Connect (4)
Permits easy switching between ve different spray
tips (12)
Run / Stop Switch (16)
Set this switch (16) to “I” before using recoil starter
(22). Set switch to “0” to switch off engine
Chemical Injection Siphon/Filter (23)
Used to siphon detergent or other pressure washer
chemicals into the low pressure stream..
High Pressure Hose Connection (18)
To connect high pressure hose.
Flexible high pressure hose (13)
Connect one end to the water pump and the other
end to the spray gun.
Fuel Tank (11a)
Fill tank with recommended fuel.
Air Filter (24)
Protects engine by ltering dust and debris out of in-
take air.
Oil Fill Cap (20)
Fill engine with oil here.
Reversing starter (22)
For manual starting of the engine.
Quick Connect Spray Tips (12)
Detergent, 0°, 15°, 25°, and 40°: for various cleaning
applications.
Spray lance (2)
Controls the application of water onto cleaning sur-
face with trigger device. Includes safety latch.
Choke Lever (Fig. 21/Pos.“Z“)
Prepares a cold engine for starting.
Water Inlet (external) (19)
Connect garden hose here.
8. Before commissioning
Fitting the Stand (Fig. 3)
Fasten the stand (8) as shown in gure 3.
Installing of the transport wheels (Fig. 3)
Mount the supplied transport wheels (6) with the cor-
responding bolts on the frame of the device as shown
in gure 3. Secure them with a split pin on the inside.
Attaching the handle to the device (Fig.4)
Fit the handle (1) to the handle tubes are already on
the device. Make sure that the holes in the handle (1)
are aligned with the holes in the handle tubes.
Push the handle (1) downwards until it locks into the
2 locking pins.
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
