Bedienungsanleitung Scheppach HD12 (Seite 15 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

781446

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

15 / 120

2. Device description (Fig. 1)

1. Housing complete with motor

2. Undercarriage with wheels

3. Side covering, left

4. Side covering, right

5. Base plate

6. Cross-member

7. Filter bag

8. Upper clamp

9. Support bar

10. Shavings bag

11. Lower clamp

12. Exhaust hose

13. Clamp 2x

14. Hose coupling

15. Accessory kit

16. Operating instructions

3. Scope of delivery

• When you unpack the device, check all parts for

possible transport damages. In case of complaints

the supplier is to be informed immediately.

• Complaints received at a later date will not be

acknow ledged.

• Check the delivery for completeness.

• Read the operating instructions to make yourself

familiar with the device prior to using it.

• Only use original scheppach parts for accessories

as well as for wearing and spare parts. Spare parts

are available from your specialized dealer.

• Specify our part numbers as well as the type and

year of construction of the device in your orders.

m ATTENTION

The device and packaging materials are not

toys! Children must not be allowed to play with

plastic bags, lm and small parts! There is a

risk of swallowing and suffocation!

4. Intended use

CE tested machines meet all valid EC machine

guidelines as well as all relevent guidelines for

each machine.

• The machine has been built in accordance with state-

of-the-art standards and the recognized safety rules.

Nevertheless, its use may constitue a risk to life and

limb of the user or of third parties,or cause damage to

the machine and to othermaterial property.

• The machine must only be used in technically per-

fect condition in accordance with its designated

use and the instructions set out in the operating

manual, and only by safety-conscious persons who

are fully aware of the risks involved in operating the

machine. Any functional disorders, especially those

affecting the safety of the machine, should there-

fore be rectied immediately. The vacuum exhaust

unit is designed only for removing saw dust (nor for

normal dust).

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

we wish you a pleasant and successful working expe-

rience with your new scheppach Scroll machine.

Note:

According to the applicable product liability law the

manufacturer of this device is not liable for damages

which arise on or in connection with this device in

case of:

• improper handling

• non-compliance with the instructions for use

• repairs by third party, non authorized skilled

workers

• installation and replacement of non-original spare

parts

• improper use

• failures of the electrical system due to the non-

compliance with the electrical specications and

the VDE 0100, DIN 57113 / VDE 0113 regulations

Recommendations:

Read the entire text of the operating instructions

prior to the assembly and operation of the device.

These operating instructions are intended to make it

easier for you to get familiar with your device and uti-

lize its intended possibilities of use.

The operating instructions contain important notes on

how to work safely, properly and economically with

your machine and how to avoid dangers, save repair

costs, reduce downtime, and increase the reliability

and working life of the machine.

In addition to the safety regulations contained herein,

you must in any case comply with the applicable reg-

ulations of your country with respect to the operation

of the machine.

Put the operating instructions in a clear plastic folder

to protect them from dirt and humidity, and store them

near the machine. The instructions must be read and

carefully observed by each operator prior to starting

the work. Only persons who have been trained in the

use of the machine and have been informed on the

related dangers and risks are allowed to use the ma-

chine. The required minimum age must be met.

In addition to the safety notes contained in the present

operating instructions and the special regulations of

your country, the generally recognized technical rules

for the operation of wood working machines must be

observed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HD12 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info