781960
26
Zoom out
Zoom in
Vorherige Seite
1/128
Nächste Seite
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
26 | GB
Operating the log lifter:
Loosen the log lifter restraining hook so the lifting

       
lifter lifting tube lies on the ground.



Push the return bracket down or the handles up

stand in the working environment of the log lifter!

Then remove the split wood and move the riving
knife and therefore the log lifter back down.

Resetting the log lifter
This is used as a second guard arm when not using
the trunk lifter or when automatic return is enabled.
For this, the arm is moved up until it locks in position
in the hook.
Transport position of the log lifter:

in position.
Comply with these notices to ensure quick and
safe work.
11. Electrical connection

for operation. The connection complies with the ap-
plicable VDE and DIN provisions.
The customer‘s mains connection as well as the ex-
-
ulations.
The product meets the requirements of EN 61000-
3-11 and is subject to special connection conditions.
-
lectable connection point is not allowed.

-


points that
-

      
the mains of at least 100 A per phase.
-

-
ate the product meets one of the two requirements,

Warning!
Loosen the lling screw (Fig. 15) before commis-
sioning. Never forget to loosen the lling screw!
Otherwise, the air in the system will constantly
be compressed and decompressed with the re-
sult that the seals of the hydraulic circuit will be
destroyed and the wood splitter can no longer be
used. In this case, the seller and the manufactur-
er will not be liable to warranty services.
Switching on and o󰀨 (14)
Press the green button for switching on.
󰀨
Note: Check the function of the ON/OFF unit before
󰀨
Restarting safety in case of current interruption
(no-volt release).
In case of current failure, inadvertent pulling of the
󰀨
      
the green button of the switch unit.
Using the retaining claw (Fig. 12)
The height of the claw can be set at various stages to
suit the length of the wood.
Splitting (Fig. 13)
-

     

Caution: The splitting blade is very sharp. Risk
of injury!
    
split.

the splitting blade goes down and splits the wood.
󰀨


-
ting wood.

Caution: During splitting, some logs can be un-
der signicant tension and suddenly break.
Force jammed logs out by applying pressure in
the splitting direction or by raising the riving
knife. In this case, only push the handles up,
do not use the return bracket. Caution: Risk of
injury
Operating the log lifter (8)
General information about the log lifter:

hung on the splitting blade with the last link.
-
ronment of the log lifter.
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Scheppach HL1350 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info