Bedienungsanleitung Scheppach HL3000GM (Seite 24 von 120) (Deutsch, Englisch, Französisch, Italienisch)

781854

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

24 | GB

8. Unpacking

Open the packaging and remove the device carefully.

Remove the packaging material as well as the pack-

aging and transport bracing (if available).

Check that the delivery is complete.

Check the device and accessory parts for transport

damage.

In case of complaints the dealer must be informed

immediately. Subsequent complaints will not be ac-

cepted.

If possible, store the packaging until the warranty pe-

riod has expired.

Read the operating manual to make yourself familiar

with the device prior to using it.

Only use original parts for accessories as well as for

wearing and spare parts. Spare parts are available

from your specialized dealer.

Specify our part numbers as well as the type and year

of construction of the device in your orders.

m ATTENTION

The device and packaging materials are not toys!

Children must not be allowed to play with plas-

tic bags, lm and small parts! There is a risk of

swallowing and suffocation!

9. Attachment / Before starting the

equipment

9.1 Attaching the three-point bolts

(enclosed accessories bag A) (Fig. 3)

Insert the threaded bolts in the designated holes and

x them from the other side with an M22 nut each.

9.2 Attaching the drive shaft protective cap (7)

(enclosed accessories bag B) (Fig. 4)

Place the drive shaft protective cap on the protruding

threaded receivers at the drive shaft and secure it

with both M10 nuts.

9.3 Putting the splitter into the work position

(enclosed accessories bag C) (Fig. 5 + 6)

Connect the splitter to the mains power. Be aware of

the motor’s direction of rotation. Lower both control

handles until the cylinder engages with the guide.

Insert the two L-pins (C) to secure the cylinder on

the kindling splitter. Secure the L-pins in the spring

tabs. Then bring the splitting blade to the top position

and remove the support. You must store the support

safely because it is needed every time the splitter is

transported.

9.4 Attaching the supporting arm (13)

(enclosed accessories bag D) (Fig. 7)

Secure the supporting arm with a hexagon bolt

M10x40, two washers and a nut.

Remaining hazards

The machine has been built using modern tech-

nology in accordance with recognized safety

rules. Some remaining hazards, however, may

still exist.

• The splitting tool can cause injuries to ngers and

hands if the wood is incorrectly guided or support-

ed.

• Thrown pieces can lead to injury if the work piece is

not correctly placed or held.

• Injury through electric current if incorrect electric

connection leads are used.

• Even when all safety measures are taken, some re-

maining hazards which are not yet evident may still

be present.

• Remaining hazards can be minimized by following

the safety instructions as well as the instructions in

the chapter Authorized use and in the entire operat-

ing manual.

• Health hazard due to electrical power, with the use

of improper electrical connection cables.

• Release the handle button and switch off the ma-

chine prior to any operations.

• Avoid accidental starts of the machine: Do not

press the start button while inserting the plug into

the socket.

• Use the tools recommended in this manual to ob-

tain the best results from your machine.

• Always keep hands away from the work area when

the machine is running.

7. Technical data

HL2200GM HL3000GM

Drive Drive shaft + e-motor

Motor V/Hz 400V / 50Hz

Input P1 W 5100 5500

Output P2 W 4000 4500

Operating mode S6 40%

PTO shaft / Motor

speed 1/min

540

1400

Phase inverter yes

Dimensions D/W/H 1540 x 1140 x 2520 mm

Log length 1100 mm

Power max. tons* 22 30

Piston stroke 948 mm

Forward speed cm/s 10,5 12,5

Return speed cm/s 7,5 6,7

Oil quantity l 24 30

Weight kg 319 373

Subject to technical changes!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HL3000GM Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info