Bedienungsanleitung Scheppach HL455 (Seite 19 von 100) (Deutsch, Englisch, Französisch, Italienisch)

781964

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 19

We accept no liability for accidents or damage that

occur due to a failure to observe this manual and the

safety instructions.

2. Device description

1. Fixed protective guard (small)

2. Handle

3. Movable protective guard

4. Fixed protective guard (large)

5. Tray table for split logs

6. Foot

7. Transport handle

8. Star grip screws (4x)

9. Cross bar

10. Transport wheels

11. Wheel axle

12. Struts (2x)

13. Engine

14. On/off switch

15. Control lever

16. Safety switch

17. Bleeder screw

18. Oil drain screw with dipstick

3. Scope of delivery

A. Operating manual

B. Enclosed accessories bag

C. Handle (2x)

D. Log splitter

E. Protective guard xed (small)

F. Protective guard movable

G. Protective guard xed (large)

H. Tray table

I. Transport wheels

J. Complete base frame

4. Intended use

The equipment is to be used only for its prescribed

purpose. Any other use is deemed to be a case of

misuse. The user / operator and not the manufactur-

er will be liable for any damage or injuries of any kind

caused as a result of this.

To use the equipment properly you must also observe

the safety information, the assembly instructions and

the operating instructions to be found in this manual.

All persons who use and service the equipment have

to be acquainted with this manual and must be in-

formed about the equipment’s potential hazards.

It is also imperative to observe the accident preven-

tion regulations in force in your area. The same ap-

plies for the general rules of health and safety at

work.

The manufacturer will not be liable for any changes

made to the equipment nor for any damage resulting

from such changes.

1. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschine GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment

and success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

We recommend:

Read through the complete text in the operating in-

structions before installing and commissioning the

device. The operating instructions are intended to

help the user to become familiar with the machine

and take advantage of its application possibilities in

accordance with the recommendations. The operat-

ing instructions contain important information on how

to operate the machine safely, professionally and

economically, how to avoid danger, costly repairs, re-

duce downtimes and how to increase reliability and

service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regu-

lations that apply for the operation of the machine in

your country. Keep the operating instructions pack-

age with the machine at all times and store it in a

plastic cover to protect it from dirt and moisture.

Read the instruction manual each time before op-

erating the machine and carefully follow its informa-

tion. The machine can only be operated by persons

who were instructed concerning the operation of the

machine and who are informed about the associat-

ed dangers. The minimum age requirement must be

complied with.

In addition to the safety instructions in this operating

manual and the separate regulations of your country,

the generally recognised technical rules for operat-

ing woodworking machines must also be observed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HL455 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info