Bedienungsanleitung Scheppach HM100Lxu (Seite 23 von 272) (Alle Sprachen)

781433

Zoom out

Zoom in

Vorherige Seite

1/272

Nächste Seite

23GB

5 Clean grease, oil and water off of the clamping sur-

faces.

6 Do not use any loose reducing rings or bushes for

the reducing of holes on saw blades.

7 Make sure that xed reducer rings for securing the

insertion tool have the same diameter and have at

least 1/3 of the cutting diameter.

8 Make sure that xed reducer rings are parallel to

each other.

9 Handle insertion tool with caution. They are ideally

stored in the originally package or special contain-

ers. Wear protective gloves in order to improve grip

and to further reduce the risk of injury.

10 Prior to the use of insertion tools, make sure that all

protective devices are properly fastened.

11 Prior to use, make sure that the insertion tool meets

the technical requirements of this electric tool and

is properly fastened.

12 Only use the supplied saw blade for cutting wood,

never for the processing of metals.

Attention: Laser radiation

Do not stare into the beam

Class 2 laser

Protect yourself and you environment from acci-

dents using suitable precautionary measures!

• Do not look directly into the laser beam with unpro-

tected eyes.

• Never look into the path of the beam.

• Never point the laser beam towards reecting surfac-

es and persons or animals. Even a laser beam with a

low output can cause damage to the eyes.

• Caution - methods other than those specied here

can result in dangerous radiation exposure.

• Never open the laser module. Unexpected exposure

to the beam can occur.

• If the mitre saw is not used for an extended period of

time, the batteries should be removed.

• The laser may not be replaced with a different type

of laser.

• Repairs of the laser may only be carried out by the

laser manufacturer or an authorised representative.

Safety instructions for handling batteries

1 Always make sure that the batteries are inserted

with the correct polarity (+ and –), as indicated on

the battery.

2 Do not short-circuit batteries.

3 Do not charge non-rechargeable batteries.

4 Do not overcharge batteries!

5 Do not mix old and new batteries or batteries of

different types or manufacturers! Replace an entire

set of batteries at the same time.

2 Maintenance and repair

–Pull out the mains plug for any adjustment or re-

pair tasks.

–The generation of noise is inuenced by vari-

ous factors, including the characteristics of saw

blades, condition of saw blade and electric tool.

Use saw blades which were designed for reduced

noise development, insofar as possible. Maintain

the electric tool and tool attachments regularly

and if necessary, initiate repairs in order to re-

duce noise.

–Report faults on the electric tool, protective devic-

es or the tool attachment to the person respon-

sible for safety as soon as they are discovered.

3 Safe work

–Only use saw blades for which the maximum per-

missible speed is not lower than the maximum

spindle speed of the machine and which are suit-

able for the material to be cut.

–Make sure that the saw blade does not touch the

rotary table in any position by pulling out the mains

plug and rotating the saw blade by hand in the

45° and 90° position. If necessary, readjust the

saw head.

–When transporting the electric tool, only use the

transport devices. Never use the protective devic-

es for handling or transport.

–Make sure that the lower part of the saw blade is cov-

ered during transport, e.g. by the protective device.

–Be sure to only use spacers and spindle rings

specied by the manufacturer as suitable for the

intended purpose.

–The oor around the machine must be level, clean

and free of loose particles, such as chips and

cutting residues.

–Do not remove any cutting residues or other parts

of workpieces from the cutting zone while the ma-

chine is running and the saw unit is not at rest.

–Make sure that the machine is always secured on

a workbench or a table if at all possible.

–Support long workpieces (e.g. with a roller table)

to prevent them sagging at the end of a cut.

Warning! This electric tool generates an electromag-

netic eld during operation. This eld can impair active

or passive medical implants under certain conditions. In

order to prevent the risk of serious or deadly injuries, we

recommend that persons with medical implants consult

with their physician and the manufacturer of the medical

implant prior to operating the electric tool.

SAFETY INSTRUCTIONS FOR THE HANDLING OF

SAW BLADES

1 Only use insertion tools if you have mastered their

use.

2 Observe the maximum speed. The maximum speed

specied on the insertion tool may not be exceeded.

If specied, observe the speed range.

3 Observe the motor / saw blade direction of rotation.

4 Do not use any insertion tools with cracks. Sort out

cracked insertion tools. Repairs are not permitted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HM100Lxu Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info