Bedienungsanleitung Scheppach HM80L (Seite 21 von 228) (Alle Sprachen)

781434

Zoom out

Zoom in

Vorherige Seite

1/228

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 21

In addition to the safety notes contained in the pre-

sent operating instructions and the special regu-

lations of your country, the generally recognized

technical rules for the operation of machines must be

observed.

We accept no liability for accidents or damage that

occur due to a failure to observe this manual and the

safety instructions.

Legend of Fig. 1

1. Start button

2. Handle

3. Locking lever

4. Motor

5. Saw blade

6. Moving saw blade guard

7. Base

8. Table insert

9. Rotary table

10. Workpiece clamp

11. Housing / base joint

12. Dust bag

13. Stationary saw blade guard

2. Scope of delivery

• Mitre saw

• Workpiece clamp

• Tool for changing the saw blade – 6 mm Allen key

• Tool for stop rail – 3 mm Allen key

• 2 work piece supports

• Support stand

• 2 batteries (AAA)

• 2 carbon brushes

• Operating instructions

3. Technical Data

Dimensions L x W x H 690 x 550 x 440

Rotary table ø 385 x 150 mm

Table height 55 mm

Saw blade Ø 210/30/2,6/1,6 WZ 24

Speed r 5000 rpm

Cutting speed 55 m/s

Pivot range 2 x 45°

Tilt angle 45°

Double mitre 45° x 45° left

Catch positions 45°, 30°, 22,5°, 15°, 0°,

15°, 22,5°, 30°, 45°

Weight 7,7 kg

Max. cut depth

90°/45° 60 / 35 mm

90°/90° 120 x 60 mm

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschine GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer,

We hope your new tool brings you much enjoyment

and success.

Note:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

We recommend:

Read through the complete text in the operating in-

structions before installing and commissioning the

device.

The operating instructions are intended to help the

user to become familiar with the machine and take

advantage of its application possibilities in accord-

ance with the recommendations.

The operating instructions contain important infor-

mation on how to operate the machine safely, pro-

fessionally and economically, how to avoid danger,

costly repairs, reduce downtimes and how to in-

crease reliability and service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in

your country. Keep the operating instructions pack-

age with the machine at all times and store it in a

plastic cover to protect it from dirt and moisture.

Read the instruction manual each time before op-

erating the machine and carefully follow its informa-

tion. The machine can only be operated by persons

who were instructed concerning the operation of the

machine and who are informed about the associated

dangers. The minimum age requirement must be

complied with.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HM80L Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info