Bedienungsanleitung Scheppach HM80L (Seite 30 von 228) (Alle Sprachen)

781434

Zoom out

Zoom in

Vorherige Seite

1/228

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

30 | GB

17. Troubleshooting

Fault Possible cause Remedy

Motor does not work Motor, cable or plug defective, fuses

burnt

Arrange for inspection of the machine by a special-

ist. Never repair the motor yourself. Danger! Check

fuses and replace as necessary

The motor starts up

slowly and does not

reach operating speed.

Voltage too low, coils damaged, capaci-

tor burnt

Contact the utility provider to check the voltage.

Arrange for inspection of the motor by a special-

ist. Arrange for replacement of the capacitor by a

specialist

Motor makes excessive

noise

Coils damaged, motor defective Arrange for inspection of the motor by a specialist

The motor does not

reach its full power.

Circuits in the network are overloaded

(lamps, other motors, etc.)

Do not use any other equipment or motors on the

same circuit

Motor overheats easily. Overloading of the motor, insufcient

cooling of the motor

Avoid overloading the motor while cutting, remove

dust from the motor in order to ensure optimal cool-

ing of the motor

Reduced cutting power

when sawing

Saw blade too small (ground too much) Readjust end stop of the saw unit

Saw cut is rough or

wavy

Saw blade dull, tooth shape not appro-

priate for the material thickness

Resharpen saw blade and/or use suitable saw

blade

Workpiece pulls away

and/or splinters

Excessive cutting pressure and/or saw

blade not suitable for use

Insert suitable saw blade

Service information

Please note that the following parts of this product

are subject to normal or natural wear and that the fol-

lowing parts are therefore also required for use as

consumables.

Wear parts*: Carbon brush, saw blade, battery, table

liners, sawdust bag, V-belts

* Not necessarily included in the scope of delivery!

16. Disposal and recycling

The equipment is supplied in packaging to prevent it

from being damaged in transit. The raw materials in

this packaging can be reused or recycled. The equip-

ment and its accessories are made of various types

of material, such as metal and plastic. Defective

components must be disposed of as special waste.

Ask your dealer or your local council.

Old devices must not be disposed of with house-

hold waste!

This symbol indicates that this product must

not be disposed of together with domestic

waste in compliance with the Directive

(2012/19/EU) pertaining to waste electrical

and electronic equipment (WEEE). This product must

be disposed of at a designated collection point.

This can occur, for example, by handing it in at an

authorised collecting point for the recycling of waste

electrical and electronic equipment. Improper han-

dling of waste equipment may have negative conse-

quences for the environment and human health due

to potentially hazardous substances that are often

contained in electrical and electronic equipment. By

properly disposing of this product, you are also con-

tributing to the effective use of natural resources.

You can obtain information on collection points for

waste equipment from your municipal administration,

public waste disposal authority, an authorised body

for the disposal of waste electrical and electronic

equipment or your waste disposal company.

Batteries and rechargeable batteries do not be-

long in the household waste!

As the consumer you are required by law to

bring all batteries and rechargeable batteries,

regardless whether they contain harmful sub-

stances* or not, to a collection point run by the local

authority or to a retailer, so that they can be disposed

of in an environmentally friendly manner.

*labelled with: Cd = cadmium, Hg = mercury, Pb =

lead

• Remove the batteries from the laser before dispos-

ing of the machine and the batteries.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HM80L Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info