Bedienungsanleitung Scheppach HM90LXU (Seite 20 von 80) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

782505

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

20 GB

1. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschine GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer,

We hope your new tool brings you much enjoyment

and success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spa-

re parts,

• Application other than specied,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

We recommend:

Read through the complete text in the operating inst-

ructions before installing and commissioning the de-

vice. The operating instructions are intended to help

the user to become familiar with the machine and

take advantage of its application possibilities in ac-

cordance with the recommendations. The operating

instructions contain important information on how to

operate the machine safely, professionally and eco-

nomically, how to avoid danger, costly repairs, re-

duce downtimes and how to increase reliability and

service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regu-

lations that apply for the operation of the machine in

your country. Keep the operating instructions packa-

ge with the machine at all times and store it in a plas-

tic cover to protect it from dirt and moisture. Read the

instruction manual each time before operating the

machine and carefully follow its information. The ma-

chine can only be operated by persons who were ins-

tructed concerning the operation of the machine and

who are informed about the associated dangers. The

minimum age requirement must be complied with.

In addition to the safety requirements in these opera-

ting instructions and your country’s applicable regu-

lations, you should observe the generally recognized

technical rules concerning the operation of woodwor-

king machines.

We cannot accept any liability for damage or acci-

dents which arise due to a failure to follow these inst-

ructions and the safety instructions.

2. Layout (Fig. 1-21)

1 Handle

2 Release lever

3 ON/OFF switch

4 Machine head

5 Movable blade guard

6 Saw blade

7 Clamping device

8 Workpiece support

9 Locking screw for workpiece support

10 Table insert

11 Locking screw for turntable

12 Locking lever for xed angle

13 Pointer

14 Scale

15 Turntable

16 Fixed saw table

17 Stop rail

18 Sawdust bag

19 Scale

20 Pointer

21 Locking screw for drag guide

22 Drag guide

23 Locking screw

24 Fastening bolt

25 Screw for cutting depth limiter

26 Stop for cutting depth limiter

27 Adjustment screw (90°)

28 Adjustment screw (45°)

29 Flange bolt

30 Outer ange

31 Saw shaft lock

32 Inner ange

33 Laser

34 ON/OFF switch for laser

35 Guide bar

a) 90° stop angle (not supplied)

b) 45° stop angle (not supplied)

c) Hexagon nut

d) Knurled nut

e) Allen key, 6 mm

3. Scope of delivery

• Open the packaging and remove the device ca-

refully.

• Remove the packaging material as well as the pa-

ckaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for trans-

port damage.

• If possible, store the packaging until the warranty

period has expired.

ATTENTION

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, lm and small parts! There is a risk of swal-

lowing and suffocation!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HM90LXU Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info