Bedienungsanleitung Scheppach HMS850 (Seite 19 von 148) (Deutsch, Englisch, Dänisch, Französisch, Italienisch, Polnisch)

759249

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

19GB

1. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Str. 69

D - 89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment

and success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized ser-

vice technicians,

• Installation and replacement of non-original

spare parts,

• Application other than specied,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

We recommend:

Read through the complete text in the operating

instructions before installing and commissioning the

device. The operating instructions are intended to

help the user to become familiar with the machine

and take advantage of its application possibilities in

accordance with the recommendations.

The operating instructions contain important

information on how to operate the machine safely,

professionally and economically, how to avoid

danger, costly repairs, reduce downtimes and how to

increase reliability and service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in

your country.

Keep the operating instructions package with the

machine at all times and store it in a plastic cover to

protect it from dirt and moisture. Read the instruc-

tion manual each time before operating the machine

and carefully follow its information. The machine can

only be operated by persons who were instructed

concerning the operation of the machine and who

are informed about the associated dangers. The

minimum age requirement must be complied with.

In addition to the safety instructions contained in

this manual and the specic country regulations the

generally accepted technical rules must be observed

for the operation of woodworking machines.

2. Layout (Fig. 1-19)

1. On/Off switch

2. Slide block

3. Push stick

4. Hand crank

5. Chip extractor

6. Parallel stop

7. Clamping lever

8. Mounting for planing knife cover

9. Setting knob for the chip depth

10. Workpiece support

11. Rubber foot

12. Planing knife cover

13. Feed table

14. Planing table

15. Blade adjustment block

16. Allen wrench - small

17. Open-ended spanner

18. Scale (Fig.3)

19. Pointer (Fig.3)

20. Thicknessing table

21. Blade

22. Latch

23. Knife block

24. Anti-kick claws

25. Mounting with knife cover plate (Fig.5)

26. Allen wrench - medium

27. Chip extractor adapter Ø 100 mm

28. Allen wrench - large

29. Scale (Fig.6)

30. Pointer (Fig.6)

31. Locking screw

32. Knurled screw

33. Locking screw

34. Fixing screw chip extractor

35. Overload switch

36. Washer

37. Allen screw

38. Scale (Fig.5)

39. Pointer (Fig.5)

40. Blade covering plate

3. Scope of delivery

• Open the packaging and remove the device

carefully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for trans-

port damage.

• If possible, store the packaging until the warranty

period has expired.

ATTENTION!

The device and packaging materials are not

toys! Children must not be allowed to play with

plastic bags, lm and small parts! There is a

risk of swallowing and suffocation!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HMS850 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info