Bedienungsanleitung Scheppach HS116 (Seite 44 von 72) (Deutsch, Englisch, Französisch)

782563

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

44 | GB

Such damaged electrical connection cables must not

be used and are life-threatening due to the insulation

damage.

Check the electrical connection cables for damage

regularly. Ensure that the connection cables are dis-

connected from electrical power when checking for

damage.

Electrical connection cables must comply with the

applicable VDE and DIN provisions. Only use con-

nection cables of the same designation.

The printing of the type designation on the connec-

tion cable is mandatory.

Connections and repair work on the electrical equip-

ment may only be carried out by electricians.

If the power cord of this device is damaged, it must be

replaced by the manufacturer, their service depart-

ment or a similarly qualied person to avoid dangers.

17.2 AC motor

• The mains voltage must be 220−240 V~.

• Extension cables up to 25 m long must have a

cross-section of 1.5 mm².

• Extension cables over 25 m long must have a

cross-section of 2.5 mm2.

Connections and repair work on the electrical equip-

ment may only be carried out by electricians.

Please provide the following information in the event

of any enquiries:

• Type of current for the motor

• Data of machine type plate

• Data of motor type plate

18. Disposal and recycling

The device is supplied in packaging to avoid trans-

port damages. This packaging is raw material and

can thus be used again or can be reintegrated into

the raw material cycle.

The device and its accessories are made of di󰀨er-

ent materials, such as metals and plastics. Take de-

fective components to special waste disposal sites.

Check with your specialist dealer or municipal admin-

istration!

ATTENTION

Product damage due to incorrect storage

- Store the product protected against dirt, dust

and moisture.

- Store the product in its original packaging.

1. Store the product in a dark, dry and frost-free

place that is inaccessible to unauthorised per-

sons.

2. The optimum storage temperature lies between 5

and 30 °C.

3. Store the operating manual with the product.

17. Electrical connection

The electrical motor installed is connected and

ready for operation. The connection complies

with the applicable VDE and DIN provisions. The

customer’s mains connection as well as the ex-

tension cables used must also comply with these

regulations.

• The product fulls the requirements of EN 61000-

3-11 and is subject to special connection require-

ments. This means that use at any freely selectable

connection points is not permitted.

• The device can cause temporary voltage uctua-

tions in unfavourable mains conditions.

• The product is only intended for use at connection

points that

a) do not exceed a maximum permissible mains im-

pedance “Z” (Zmax = 0.345 Ω), or

b) have a continuous current-carrying capacity of

the mains of at least 100 A per phase.

• As the user, you are required to ensure that the

connection point at which you wish to operate the

product fulls one of the requirements mentioned,

a) or b). If necessary, consult with your energy sup-

plier in this regard.

Important information

In the event of overloading, the motor will switch itself

o󰀨. After a cool-down period (time varies) the motor

can be switched back on again.

17.1 Damaged electrical connection cable

The insulation on electrical connection cables is of-

ten damaged.

This may have the following causes:

• Pressure points, where connection cables are

passed through windows or doors

• Kinks where the connection cable has been im-

properly fastened or routed

• Places where the connection cables have been cut

due to being driven over

• Insulation damage due to being ripped out of the

wall outlet

• Cracks due to the insulation ageing

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HS116 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info