Bedienungsanleitung Scheppach KSB56 - Woodster (Seite 36 von 76) (Deutsch, Englisch, Französisch)

782040

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

36 GB

19. If liquid is spilled when lling the oil or fuel tank, the

machine must be cleaned before use.

As a chainsaw user, you must follow several points

in order to carry out your sawing work without acci-

dents and injuries.

1. A basic understanding of kickback can reduce or ex-

clude the element of surprise. Sudden rash reactions

can lead to accidents.

2. When the motor is running, hold on to the saw tightly

with both hands, with the right hand on the handle at

the back and the left hand on the handle at the front.

Thumbs and ngers must rmly clasp the chainsaw‘s

handles. A secure hold helps you to absorb kickback

and keep the saw under control. Do not let go.

3. Ensure that the area where you are cutting is free

from obstacles. The tip of the chain bar must not

come in contact with tree trunks, branches and simi-

lar when cutting with the saw.

4. Use a fast motor speed.

5. Do not lean too far forwards and do not cut above

your shoulder height.

6. Sharpen and maintain the chainsaw in accordance

with the manufacturer‘s instructions.

7. If the tool becomes jammed during cutting, it has to

be turned o󰀨 immediately and freed carefully. After-

wards, the machine has to be checked for damage

(e.g. bent chain bar) and a test run has to be carried

out.

To cut with the chainsaw, place the stop directly on

the wood to be cut. It is also recommended to use

the stopper claw to cut branches of large diameter.

The stopper claw is rmly attached to the wood be-

fore cutting with a running chainsaw. Lift the end of

the chain saw with the rear handle and guide it with

the bow handle. The claw serves as a fulcrum. The

transfer takes place by lightly pressing the handle.

The saw can thus be easily withdrawn. Insert the

claw and raise the rear handle again.

Use only admitted chan saw and chain bar combina-

tion (see chapter 13)!

The cutting equipment supplied is optimally matched to

this chain saw.

When pairing of components do not match, the cutting

attachment can be irreparably damaged after only a

short operating time and cause injury.

m NOTICE

The following information is mainly for the end user or

the infrequent user. This chainsaw has been designed

for occasional use by home owners, garden owners

and campers, for general work such as clearing, cutting

rewood etc. It is not intended for longer work. During

longer work, because of vibrations, there is a risk of cir-

culation problems in the user‘s hands (white-nger-syn-

drome). White-nger-syndrome is a vascular disease

where the small blood vessels in ngers and toes con-

tract seizure-like. The a󰀨ected areas are no longer sup-

plied with blood and therefore look very pale.

Frequent use of vibrating machines can cause nerve

damage in people whose circulation is compromised

(e.g. smokers, people with diabetes).

If you notice unusual impairment, immediately stop the

work and consult a doctor. Observe the following notices

in order to reduce risks:

• Keep your body, and particularly your hands, warm

in cold weather.

• Take regular breaks during which you should move

your hands to promote circulation.

• Ensure the lowest possible vibration of the machine by

regularly maintaining it and keeping components tight.

5.2 Personal safety

• Never use only one hand when using the saw! Oth-

erwise there is a risk that operating sta󰀨, helpers or

onlookers may get injured. A chainsaw has been de-

signed for use with both hands.

• Wear your Personal Protective Equipment (PPE), con-

sisting of: Cut-resistant shoes, cut-protection trousers,

hi-vis vest or jacket in signal colours, gloves and a

helmet with visor and hearing protection.

• When starting the chainsaw or cutting with it, no oth-

er people should be close to you. Ensure onlookers

and animals cannot get into the working environment.

• When the motor is running, all body parts must point

away from the chainsaw.

5.3 Safety notices for handling ammable fuels

1. WARNING!: Petrol is easily ammable!

2. Store petrol in containers that have been designed

specially for this purpose.

3. Rell with petrol when you are outdoors, and do not

smoke.

4. Rell with petrol before starting the motor. Never re-

move the fuel tank ller cap or rell with petrol while

the motor is running or when it is still hot.

5. When fuel has been spilled, do not start the motor but

remove the machine from the area of the spilled fu-

el and avoid all ignition sources until all petrol fumes

have dispersed. Put the cap back securely on the fu-

el tank and on the canister.

Refuelling

• Turn o󰀨 the motor before refuelling.

m CAUTION! Always open the fuel ller cap carefully so

the existing pressure can be released slowly.

• High temperatures are generated on the casing dur-

ing work. Before refuelling, allow the machine to cool

down fully.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach KSB56 - Woodster Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info