Bedienungsanleitung Scheppach KZS1500 Primaster (Seite 25 von 52) (Deutsch, Englisch, Französisch)

782502

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

GB | 25

Maintain the electric tool and tool attach-

ments regularly and if necessary, initiate

repairs in order to reduce noise.

–Report faults on the electric tool, protective

devices or the tool attachment to the person

responsible for safety as soon as they are

discovered.

3 Safe work

- Make sure that a suitable saw blade for the

material to be cut is selected.

- Never use the machine to cut other materials

as specied.

- To transport the machine follow the procedure

of point 9.

When transporting the electric tool, only use

the transport devices. Never use the protective

devices for handling or transport.

- Operate the machine only if the protective

devices are functional, in good condition and in

the correct position.

- The oor around the machine must be level,

clean and free of loose particles, such as chips

and cutting residues.

- Only use saw blades for which the maximum

permissible speed is not lower than the maxi-

mum spindle speed of the machine and which

are suitable for the material to be cut.

- Be sure to only use spacers and spindle rings

specied by the manufacturer as suitable for

the intended purpose.

- Attention! Do not replace the laser by a di󰀨er-

ent type.

Repairs may only be carried out by the manu-

facturer or an authorized representative.

- Do not remove any cutting residues or other

parts of workpieces from the cutting zone while

the machine is running and the saw unit is not

at rest.

Warning! This electric tool generates an electro-

magnetic eld during operation. This eld can impair

active or passive medical implants under certain

conditions. In order to prevent the risk of serious or

deadly injuries, we recommend that persons with

medical implants consult with their physician and the

manufacturer of the medical implant prior to operat-

ing the electric tool.

Safety instructions for the handling of saw

blades

1 Only use insertion tools if you have mastered their

use.

2 Observe the maximum speed. The maximum

speed specied on the insertion tool may not

be exceeded. If specied, observe the speed

range.

–Do not use any electric tool on which the

switch cannot be switched on and o󰀨.

21 ATTENTION!

–Exercise elevated caution for double mitre

cuts.

22 ATTENTION!

–The use of other insertion tools and other

accessories can entail a risk of injury.

23 Have your electric tool repaired by a qualied

electrician

–This electric tool conforms to the applicable

safety regulations. Repairs may only be per-

formed by an electrician using original spare

parts. Otherwise accidents can occur.

Additional safety instructions

1 Safety precautions

–Warning! Do not use damaged or deformed

saw blades.

–Replace a worn table insert.

–Only use saw blades recommended by the

manufacturer which conform to EN 847-1.

–Make sure that a suitable saw blade for the

material to be cut is selected.

–Wear suitable personal protective equipment.

This includes:

–Hearing protection to avoid the risk of

becoming hearing impaired,

–Respiratory protection to avoid the risk of

inhaling harmful dust,

–Wear gloves when handling saw blades

and rough materials. Carry saw blades in a

container whenever practical.

–Wear goggles. Sparks generated during

work or splinters, chippings and dust

coming from the device can lead to loss of

eyesight.

–Connect a dust collecting device to the elec-

tric tool when sawing wood. The emission

of dust is inuenced, among other things,

by the type of material to be processed, the

signicance of local separation (collection or

source) and the correct setting of the hood/

guide plates/guides.

–Do not use saw blades made of high-speed

alloy steel (HSS steel).

2 Maintenance and repair

–Pull out the mains plug for any adjustment or

repair tasks.

–The generation of noise is inuenced by

various factors, including the characteristics

of saw blades, condition of saw blade and

electric tool. Use saw blades which were

designed for reduced noise development,

insofar as possible.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach KZS1500 Primaster Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info