Bedienungsanleitung Scheppach MBS1100 (Seite 29 von 172) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch, Schwedisch)

781683

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 29

Please provide the following information in the event

of any enquiries:

• Type of current for the motor

• Machine data - type plate

13. Disposal and recycling

The equipment is supplied in packaging to preven it

from being damaged in transit. The raw materials in

this packaging can be reused or recycled. The equip-

ment and its accessories are made of various types

of material, such as metal and plastic. Defective

components must be disposed of as special waste.

Ask your dealer or your local council.

Old devices must not be disposed of with house-

hold waste!

This symbol indicates that this product must

not be disposed of together with domestic

waste in compliance with the Directive

(2012/19/EU) pertaining to waste electrical and

electronic equipment (WEEE). This product mustbe

disposed of at a designated collection point. This can

occur, for example, by handing it in at an authorised

collecting point for the recycling of waste electrical

and electronic equipment. Improper handling of

waste equipment may have negative consequences

for the environment and human health due to poten-

tially hazardous substances that are often contained

in electrical and electronic equipment. By properly

disposing of this product, you are also contributing to

the effective use of natural resources. You can obtain

information on collection points for waste equipment

from your municipal administration, public waste dis-

posal authority, an authorised body for the disposal

of waste electrical and electronic equipment or your

waste disposal company.

• The product meets the requirements of EN 61000-

3-11 and is subject to special connection condi-

tions. This means that use of the product at any

freely selectable connection point is not allowed.

• Given unfavorable conditions in the power sup-

ply the product can cause the voltage to uctuate

temporarily.

• The product is intended solely for use at connec-

tion points that

a) do not exceed a maximum permitted supply im-

pedance “Z”, or

b) have a continuous current-carrying capacity of

the mains of at least 100 A per phase.

• As the user, you are required to ensure, in consul-

tation with your electric power company if neces-

sary, that the connection point at which you wish to

operate the product meets one of the two require-

ments, a) or b), named above.

Defective Electric Connection Lines

Often, insulation damages occur on electrical con-

nection lines.

Causes are:

• Drag marks if connection lines are led through win-

dow or door clearances.

• Kinks due to improper attachment or routing of the

connection line.

• Cuts caused by running over the connection line.

• Insulation damages caused by pulling the connec-

tion line out of the wall socket.

• Fissures caused by the ageing of the insulation.

Such defective electric connection lines must not be

used and are hazardous due to the insulation dam-

ages.

Regularly check the electrical connection lines for

damages. Please make sure that the connection

lines are disconnected from the mains supply during

the check.

Electrical connection lines must comply with the rel-

evant VDE and DIN regulations. Only use connection

lines labelled with H05VV-F.

The labelling of the connection cable with the type

specication is required.

AC motor

• The mains voltage must be 220 - 240 V~

• Extension cables up to 25 m long must have a

cross-section of 1.5 mm2.

Connections and repairs of electrical equipment may

only be carried out by an electrician.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach MBS1100 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info