Bedienungsanleitung Scheppach MIX125 (Seite 17 von 32) (Deutsch, Englisch, Französisch, Italienisch)

644553

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operation

Operate the concrete mixer only if no parts

(e.g., safety covers) are missing or defective,

and the connecting cable is not damaged.

Set up:

• Place the concrete mixer horizontally on

even, rm ground.

• Do not place it on the connecting cable!

• Route the connecting cable in a manner,

such that it cannot be kinked, crushed or

damaged in some other way.

Note:

It should be possible to swivel the drum to

the right and left. There must be sufcient

space for a wheelbarrow under the drum, so

that it can be emptied.

Activation:

• Plug the device into the socket Activation

on “I” (green button) / Deactivation on

“0” (red button)

Moving the drum (Fig. 12):

• To move the drum, pull back the hand

wheel so that the drum can be moved.

• When the drum is in the desired position,

lock the hand wheel again.

Filling

• Before lling the drum, ensure that the

opening is aligned in such a way that the

mixture cannot fall out of the drum. (Fig.

13)

• Put the mixture in when the drum is rotating

(do not overll the drum)

Caution! Risk of moving parts

Emptying

• Swivel the drum in the downward direction

to empty it

• Ensure that there is an adequate container

under the drum (e.g., wheelbarrow).

• Ensure that no mixture falls on the ground

Transport

Caution!

Pull the power plug out, every time, before transporting the machine.

1. Set the lling opening downwards.

2. During transportation by motor vehicle, remove the screws and fold the stands.

3. Lock the mixer with a strap to prevent displacement

4. Do not lift the concrete mixer with the help of a crane

Maintenance

Caution!

While working with the concrete mixer or perfor-

ming repairs on it, please do the following:

Switch off the concrete mixer, wait for the drum

to come to a standstill and pull out the pow-

er plug.

Repairs on the concrete mixer should be perfor-

med only by authorised technicians.

Perform visual inspection before each use of the

concrete mixer.

All safety parts must be installed.

Defective connecting cables should not be used.

Cleaning

Caution! Switch off the machine, wait for the

drum to come to a standstill and pull out the

power plug.

Clean the drum with water after each use of the

concrete mixer.

Remove cement and mortar residues. Do not

tap motor casing and drum with a shovel or any

other hard object, as these can be damaged.

Checking/re- adjusting belt tension

Caution! Switch off the machine, wait for the

drum to come to a standstill and pull out the

power plug.

• Remove the cover of the motor casing,

check the belt tension (on pressing the belt

with the nger, it should yield by approx.

5mm.)

• Belts are wear and tear parts that must be

replaced after a certain period. If necessa-

ry, detach the screws on the motor, replace

the belt, adjust the correct tension and

tighten the screws again.

• Reinstall the motor cover.

Troubleshooting

Fault Possible cause Remedy

Motor switches off Motor is overloaded Let motor cool down

Motor runs, drum does not move V-belt skids through Replace V-belt

Switch off the concrete mixer if such faults occur, pull out the power plug and get the fault rectied by an authorised professional company

Dismantling and disposal

The machine does not contain any substances

that are hazardous to health or harmful for the

environment, as it was produced entirely from

recyclable materials or materials that can be

disposed through normal means.

For disposal, please contact a specialist com-

pany or a qualied professional who knows the

possible risks, has read these instructions for

use, and follows them scrupulously. If the ma-

chine has served its time, please comply with all

the specied accident prevention standards, and

proceed as follows:

• Disconnect the energy supply (electrical or

PTO),

• Remove all power cables and deposit them

at a specialist location, in accordance

with the applicable country-specic legal

provisions.

• Put all the remaining machine parts at a

scrap collection location, in accordance

with the applicable country-specic legal

provisions.

Ensure that each machine part is disposed

of in accordance with the relevant applicable

country-specic legal provisions.

DGB

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach MIX125 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info