Bedienungsanleitung Scheppach MT-P120Li (Seite 10 von 64) (Deutsch, Englisch, Holländisch, Französisch, Schwedisch, Norwegisch)

782593

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Technical Data

Motor power supply: ........................................................................................................................................................................................12 V d.c.

Idling speed: ..................................................................................................................................................................................... 5000-16000 min-1

Oscillation angle: .........................................................................................................................................................................................................3°

Rated voltage for rechargeable battery: ......................................................................................................................................................10.8 V d.c.

Charge current for rechargeable battery: ..............................................................................................................................................................3.4 A

Battery charger supply voltage: .................................................................................................................................................................230V~ 50Hz

Weight: ................................................................................................................................................................................................................ 0.9 kg

Technical modications reserved!

Sound and vibration

Sound and vibration values were measured in

accordance with EN 60745.

LpA sound pressure level 78.5 dB(A)

KpAuncertainty 3 dB

LWA sound power level 89.5 dB(A)

KWAuncertainty 3 dB

Wear ear-muffs.

The impact of noise can cause damage to

hearing.

Total vibration values (vector sum of three

directions) determined in accordance with EN

60745.

Handle

Vibration emission value ah = 2.97 m/s²

Uncertainty K = 1.5 m/s2

Additional information for electric power

tools

Warning!

The specied vibration value was established

in accordance with a standardized testing

method. It may change according to how the

electric equipment is used and may exceed the

specied value in exceptional circumstances.

The specied vibration value can be used to

compare the equipment with other electric

power tools.

The specied vibration value can be used for

initial assessment of a harmful effect.

Keep the noise emissions and vibrations to

a minimum.

• Only use appliances which are in perfect

working order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the

appliance.

• Do not overload the appliance.

• Have the appliance serviced whenever

necessary.

• Switch the appliance off when it is not in

use.

• Wear protective gloves

Explanation of symbols

Wear ear protection.

Wear a dust mask.

Wear eye protection.

mThe parts and sections of

these operating instructions

concerning your safety are

marked with this symbol.

Please read the operating

instructions before using

this electric tool.

General information

• After unpacking, check all parts for

possible transportation damages. In the

event of complaints, inform the supplier

immediately. Any complaints made after

this time will not be accepted.

• The shipment is to be checked for com-

pleteness upon receipt.

• Read through the manual carefully in

order to make yourself familiar in dealing

with the device before using it for the rst

time.

• Only use original equipment regarding

accessories, as well as consumable

items and spare parts. Spare parts can

be obtained from your specialized dealer.

When ordering, please specify our part

numbers, as well as type and construc-

tion year of the device.

NOTE:

According to the applicable product liability

laws, the manufacturer of the device does not

assume liability for damages to the product or

damages caused by the product that occurs

due to:

• Improper handling,

• Non-compliance of the operating instruc-

tions,

• Repairs by third parties, not by autho-

rized service technicians,

• Installation and replacement of non-

original spare parts,

• Application other than specied,

• A breakdown of the electrical system that

occurs due to the non-compliance of the

electric regulations and VDE regulations

0100, DIN 57113 / VDE0113.

We recommend:

Read through the complete text in the

operating instructions before installing and

commissioning the device. The operating

instructions are intended to help the user to

become familiar with the machine and take

advantage of its application possibilities in

accordance with the recommendations. The

operating instructions contain important infor-

mation on how to operate the machine safely,

professionally and economically, how to avoid

danger, costly repairs, reduce downtimes and

how to increase reliability and service life of

the machine.

In addition to the safety regulations in the

operating instructions, you have to meet the

applicable regulations that apply for the ope-

ration of the machine in your country. Keep

the operating instructions package with the

machine at all times and store it in a plastic

cover to protect it from dirt and moisture.

Read the instruction manual each time before

operating the machine and carefully follow

its information. The machine can only be

operated by persons who were instructed

concerning the operation of the machine

and who are informed about the associated

dangers. The minimum age requirement must

be complied with.

We have marked the points in this manual

that concern your safety with this sign: m

Scheppach MT-P120Li Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info