Bedienungsanleitung Scheppach MT140 (Seite 18 von 52) (Deutsch, Englisch, Französisch)

757078

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

18 І 52

II. Layout (Fig. 1/3/5)

1 Guard, xed

2 Guard, adjustable

3 Spindle lock

4 Clamping jaw, exible

5 Quick clamping lever

6 Clamping handle

7 Adjustable clamping jaw

8 Head Lock Pin (transport)

9 Machine head

10 Transport handle

11 Switch locking knob

12 ON/OFF-switch

13 Handle

14 Wrench (13 mm) (Cutting wheels replacement)

15 Cutting depth adjustment screw

16 Cutting wheel

A Hexagon bolts

B Clamping claw

C Locking nut

D Clamping screw

E Cover plate

III. Scope of delivery

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport

damage.

• If possible, store the packaging until the warranty

period has expired.

m Attention!

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, lm and small parts! There is a risk of swal-

lowing and suffocation!

IV. Intended use

The Metal Cut-Off Saw is designed for cutting metal

commensurate with the machineʼs size.

The machine is to be used only for its prescribed

purpose.

Any other use is deemed to be a case of misuse.

The user/operator and not the manufacturer will be

held liable for damage and/or injuries of any kind that

result from such misuse.

The machine is to be operated only with suitable

cutting-off wheels. It is prohibited to use any kind of

saw blade made of HSS, HM, CV, etc. To use the

machine properly you must also observe the safety

regulations, the assembly instructions and the oper-

ating instructions to be found in this manual.

I. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschine GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment

and success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

WE RECOMMEND:

Read through the complete text in the operating in-

structions before installing and commissioning the

device. The operating instructions are intended to

help the user to become familiar with the machine

and take advantage of its application possibilities in

accordance with the recommendations. The operat-

ing instructions contain important information on how

to operate the machine safely, professionally and

economically, how to avoid danger, costly repairs, re-

duce downtimes and how to increase reliability and

service life of the machine. In addition to the safety

regulations in the operating instructions, you have

to meet the applicable regulations that apply for the

operation of the machine in your country. Keep the

operating instructions package with the machine at all

times and store it in a plastic cover to protect it from

dirt and moisture. Read the instruction manual each

time before operating the machine and carefully fol-

low its information. The machine can only be oper-

ated by persons who were instructed concerning the

operation of the machine and who are informed about

the associated dangers. The minimum age require-

ment must be complied with. In addition to the safety

requirements in these operating instructions and your

country’s applicable regulations, you should observe

the generally recognized technical rules concerning

the operation of woodworking machines.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach MT140 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info