Bedienungsanleitung Scheppach OSM600 (Seite 18 von 116) (Deutsch, Englisch, Französisch, Italienisch, Polnisch)

781479

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

18 | GB

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer,

We hope your new tool brings you much enjoyment

and success.

Note:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs due

to the non-compliance of the electric regulations and

VDE regulations 0100, DIN 57113 / VDE0113.

We recommend:

Read through the complete text in the operating in-

structions before installing and commissioning the

device. The operating instructions are intended to

help the user to become familiar with the machine

and take advantage of its application possibilities in

accordance with the recommendations. The operat-

ing instructions contain important information on how

to operate the machine safely, professionally and

economically, how to avoid danger, costly repairs, re-

duce downtimes and how to increase reliability and

service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in

your country. Keep the operating instructions pack-

age with the machine at all times and store it in a

plastic cover to protect it from dirt and moisture. Read

the instruction manual each time before operating the

machine and carefully follow its information. The ma-

chine can only be operated by persons who were in-

structed concerning the operation of the machine and

who are informed about the associated dangers. The

minimum age requirement must be complied with.

In addition to the safety requirements in these operat-

ing instructions and your country’s applicable regula-

tions, you should observe the generally recognized

technical rules concerning the operation of wood-

working machines.

We cannot accept any liability for damage or acci-

dents which arise due to a failure to follow these in-

structions and the safety instructions.

2. Device description

1. tool spindle

2. worktable

3. ON/OFF switch

4. xing screw

5. vacuum connector

6. cover

7. rubber sleeves

8. table inlets

9. abrasive sleeves

10. Sanding belt attachment

11. abrasive belt

12. attempt

13. Sanding belt tensioner

14. regulating screw

15. locking levers

3. Scope of delivery

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport

damage.

• If possible, store the packaging until the warranty

period has expired.

m ATTENTION!

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, lm and small parts! There is a risk of swallow-

ing and su󰀨ocation!

4 x rubber sleeves

• length 115 mm, Ø 19 / 26 / 38 / 51 mm

5 x abrasive sleeves

• K80, Ø 13 / 19 / 26 / 38 / 51 mm

5 x table inlets

• Ø 13 / 19 / 26 / 38 / 51 mm

A. Locking screw ( abrasive belt)

B. Washer

C. Locking screw (stop)

D. 3 x spindle disks Ø 16 / 22 / 44 mm

E. Hexagon nut M8

F. Allen key SW13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach OSM600 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info