Bedienungsanleitung Scheppach OX 3-1000 (Seite 10 von 41) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch)

781958

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

10 english

Only the operator is allowed in the work area

of the machine. Keep other people and ani-

mals (minimum distance 5 m) at a distance.

Do not remove jammed trunks with your

hands.

Caution! Switch off the engine before repair,

maintenance and cleaning. Unplug the mains

plug.

Danger of bruising and injury from sharp

edges; never touch danger areas when the

cleaver is moving.

High-voltage, danger to life!

The machine must only be operated by one

person!

Oil

1. 2.

Loosen the vent bolt two revolutions, before

starting work. Close before transport.

Caution! Moving machine parts!

Do not transport the device in the horizontal

position!

Familiarise yourself with the two-hand control before

operating the machine! Read the operating instructions

thoroughly.

Additional warnings without symbols:

• Do not remove the casing.

In this operating manual, points concerning your safety will

be marked with this symbol: m

m General Safety Instructions

WARNING: If you use electric tools, you should observe the

general safety measures mentioned below in order to reduce

the risk of ﬁre, electric shock, and personal injury.

Please read all instructions before working with these tools.

• Observe all safety instructions and warnings for the

machine.

• Keep all safety instructions and warning labels on the

machine complete and in legible condition.

• You must not remove the safety devices on the ma-

chine or make them inoperative.

• Inspect the power cords. Do not use faulty power cords.

• Check that the two-hand control is functioning cor-

rectly before operation.

• The operator must be at least 18 years of age. Trainees

must be at least 16 years old, but may only work with

the machine under supervision.

• Wear work gloves during work.

• Attention during work: injury hazard to ﬁngers and

hands.

• When splitting heavy or bulky materials, use appropri-

ate appliance for support.

• Switch motor off for retooling, adjustment, and clean-

ing, as well as for maintenance and troubleshooting.

Pull power plug!

• Installation, repairs and maintenance work on the elec-

trical installation may only be carried out by qualiﬁed

personnel.

• All guards and safety mechanisms must be reinstalled

immediately after completing the repairs or the main-

tenance work.

• Switch the motor off when leaving the working area.

Pull power plug!

Additional Safety Instructions for Log Splitters

• The log splitter may only be operated by a single per-

son.

• Wear protective gear (protective goggles/mask, gloves,

hearing protection, and safety shoes) to protect against

possible injuries.

• Never split logs with nails, wire or other objects in

them.

• Logs already split and shavings pose a threat within the

working area. There is the risk of tripping, slipping, or

falling. Always keep the working area tidy.

• Never put your hands on moving parts while the ma-

chine is switched on.

• Only split logs with a maximal length of 1,300 mm.

• Before starting work, check the hydraulic lines and

hoses.

• Check protective units and functions of the machine.

• Do not put your hands into the splitting area.

• Should the wood jam, turn the machine off and remove

the wood carefully.

m Intended Use

This machine complies with the current EC machinery direc-

tive.

• The hydraulic log splitter is designed for “stationary

operation”, logs may only be split standing upright and

along the grain. The dimensions of the logs to be split:

wood length: 60/96,5/104/133 cm

ø min/max: 10/40 cm

• Never split logs lying horizontally or across the grain.

• The manufacture’s safety, working, and maintenance

instructions as well the dimensions stated in the tech-

nical speciﬁcations must be observed.

• The applicable rules for accident prevention and other

generally accepted rules concerning safety must be

obeyed.

• The machine may only be operated, serviced, or re-

paired by persons familiar with it and aware of the

risks. Arbitrary modiﬁcations of the machine exclude

any liability of the manufacture for damages arising

from this.

• The machine may only be used with original accesso-

ries and original tools from the manufacturer.

• Every other use will be considered to be unintended

use. The manufacturer assumes no liability for dam-

ages arising from this and it will be solely at the opera-

tor’s own risk.

m Residual Risks

The machine was designed according to the state of the

art and accepted safety standards. However, residual risks

might occur during work.

• Risk of ﬁnger or hand injury by the cutting knife due

to improper guidance or placement of the log.

OX 3-1000 2011.indd 10 07.11.11 12:03

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach OX 3-1000 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info