Bedienungsanleitung Scheppach OX 7-1020 (Seite 19 von 53) (Deutsch, Englisch, Französisch)

781949

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

Specic noise values

The according to the EN 23746 for the sound

pressure level resp. EN 31202 (correction factor

k3 after supplement A.2 from EN 31204 calcula-

ted) for the sound pressure level on the working

site ascertained noise emission value amounts

under the foundations of ISO 7904 supplement

A performed working conditions to:

Sound pression level in dB

Idle LWA / Processing LWA dB(A)

66 / 83

Sound pressure level on working site in dB

Idle LpAeq / Processing LpAeq dB(A)

60 / 77

The specied values are emission values and

therefore should not at the same time be reliable

working site values. Although there is a corre-

lation between emission and immision levels,

it cannot unfailingly be derived if extra precau-

tions need to be taken or not. Factors, which

inuence the actual availabe immusion value on

working site, include the peculiarities of working

area, other sources of noise, e.g. the number of

machines and other adjoining processes. The

allowed working values could vary from country

to country. However, the information should qua-

lify the user, to be able to make an estimation of

the dangers and risk

General notes

We hope you have a lot of fun and success

using your new machine.

Note:

Under current product liability regulations, the

manufacturer of this equipment will not be liable

for damages to the equipment or caused by it in

the case of:

• improper handling,

• failure to observe the operating instruc-

tions,

• repairs by third parties, non-authorised

technicians,

• installation of and replacement by non-

original spare parts,

• non-intended use,

• failures of the electrical system while not

adhering to the electrical regulations and

regulations of the VDE (German Associati-

on for Electrical, Electronic and Information

Technologies) 0100, DIN 57113 / VDE0113.

Our recommendations:

Read the entire text of the operating instructions

before installation and operation.

These operating instructions are to help you to

get to know your machine and its intended elds

of application.

The operating instructions contain important

notes on how to work safely, properly, and

efciently with the machine and how to avoid

hazards, save costs of repairs, keep downtimes

short und improve reliability and product life of

the machine.

In addition to the safety instructions in this

manual, you must observe all regulations of

your country applicable for the operation of the

machine.

Keep the operating instructions close to the ma-

chine, protected by a plastic envelope against

dirt and humidity. Any operator must read the

operating instructions prior to work and follow

them precisely. Only people trained to operate

the machine and who are aware of the asso-

ciated dangers are permitted to work with the

machine. The required minimum age must be

observed.

• After unpacking, inspect all parts for

possible transport damages. In the case of

complaints you must inform the deliverer

immediately. Subsequent complaints will

not be accepted.

• Check the shipment to ensure that it is

complete.

• Familiarise yourself with the equipment with

the help of the operating instructions before

putting the equipment into operation.

• Use only original parts as accessories and

spare parts. You can buy spare parts from

your specialist dealer.

• When you order, please state our order

numbers as well as the equipment’s type

and year of manufacture.

General safety notes m

In this operating manual, points concerning

your safety will be marked with this symbol:

WARNING: If you use electric tools, you

should observe the general safety measures

mentioned below in order to reduce the risk

of re, electric shock, and injury to people.

Please read all instructions before working

with these tools.

• Observe all safety instructions and war-

nings for the machine.

• Keep all safety instructions and warning

labels on the machine complete and in

legible condition.

• You must not remove the safety devices on

the machine or make them inoperative.

• Check the power cords. Do not use faulty

power cords.

• Check that the two-hand control is functio-

ning correctly before operation.

• The operator must be at least 18 years of

age. Trainees must be at least 16 years old,

but may only work with the machine under

supervision.

• Wear work gloves during work.

• Attention during work: injury hazard to

ngers and hands.

• When splitting heavy or bulky materials,

use appropriate appliance for support.

• Switch motor off for retooling, adjustment,

and cleaning, as well as for maintenance

and troubleshooting. Pull power plug!

• Installation, repairs and maintenance work

on the electrical installation may only be

carried out by qualied personnel.

• All guards and safety mechanisms must be

reinstalled immediately after completing the

repairs or the maintenance work.

• The adjustments on the hydraulic valve and

on the control levers must not be changed.

Risk of accident and of destruction of the

hydraulic components!

• Switch the motor off when leaving the wor-

king area. Pull power plug!

Additional Safety Instructions for Log Split-

ters

• The log splitter may only be operated by a

single person.

• Wear protective gear (goggles/ visor,

gloves, safety boots) to protect yourself

from possible injuries.

• Never split logs with nails, wire or other

objects in them.

• Logs already split and shavings pose a

threat within the working area. There is the

risk of tripping, slipping, or falling. Always

keep the working area tidy.

• Never put your hands on moving parts while

the machine is switched on.

• Only split logs with a maximal length of

1,130 mm.

• Only split logs with a minimal diameter of

60 mm and a maximum diameter of 600

Intended use m

This machine complies with the current EC

machinery directive.

• The hydraulic log splitter is designed for

“stationary operation”, logs may only be

split standing upright and along the grain.

The dimensions of the logs to be split:

•

logs cut to length 113 cm

• Never split logs lying horizontally or across

the grain.

• The manufacture’s safety, working, and

maintenance instructions as well the di

mensions stated in the technical specica-

tions must be observed.

• The applicable rules for accident prevention

and other generally accepted rules concer

ning safety must be obeyed.

• The machine may only be operated, ser-

viced, or repaired by persons familiar with it

and aware of the risks. Arbitrary modica-

tions of the machine exclude any liability of

the manufacture for damages arising from

this.

• The machine may only be used with original

accessories and original tools from the

manufacturer.

• Every other use will be considered to be

unintended use. The manufacturer assu-

mes no liability for damages arising from

this and it will be solely at the operator’s

own risk.

DGB

Scheppach OX 7-1020 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info