Bedienungsanleitung Scheppach PL75 (Seite 14 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch)

644549

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

14 GB

1. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We wish you much joy and success in working with your

new appliance.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by the

product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regulations

and VDE regulations 0100, DIN 57113 / VDE0113.

We recommend:

Read through the complete text in the operating in-

structions before installing and commissioning the

device. The operating instructions are intended to

help the user to become familiar with the machine

and take advantage of its application possibilities in

accordance with the recommendations. The operating

instructions contain important information on how to

operate the machine safely, professionally and eco-

nomically, how to avoid danger, costly repairs, reduce

downtimes and how to increase reliability and service

life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regulati-

ons that apply for the operation of the machine in your

country. Keep the operating instructions package with

the machine at all times and store it in a plastic cover

to protect it from dirt and moisture. Read the instruc-

tion manual each time before operating the machi-

ne and carefully follow its information. The machine

can only be operated by persons who were instructed

concerning the operation of the machine and who are

informed about the associated dangers. The minimum

age requirement must be complied with.

2. Device description Fig.1a, 1b

1. Handle/hand grip

2. Front handle

3. Plunge-cut trigger

4. On/off switch

5. Base plate

6. Adjustment screw for depth of cut

7. Scale for depth of cut

8. Mitre adjustment screw

9. Mitre square

10. 90-degree adjustment screw

11. Saw blade

12. Suction nozzle

13. Adjustment screw for guide rail

14. Shaft locking mechanism

15. Splitter guard

3. General information

• After unpacking, check all parts for possible trans-

portation damages. In the event of complaints, in-

form the supplier immediately. Any complaints made

after this time will not be accepted.

• The shipment is to be checked for completeness

upon receipt.

• Read through the manual carefully in order to make

yourself familiar in dealing with the device before

using it for the rst time.

• Only use original equipment regarding accessories,

as well as consumable items and spare parts. Spare

parts can be obtained from your specialized dealer.

When ordering, please specify our part numbers, as

well as type and construction year of the device.

4. Proper use

CE tested machines meet all valid EC machine gui-

delines as well as all relevent guidelines for each

machine.

• The machine must only be used in technically per-

fect con dition in accordance with its designated use

and the in structions set out in the operating manual,

and only by safety-conscious persons who are fully

aware of the risks involved in oerating the machine.

Any functional dis orders, especially those affecting

the safety of the machine, sholud terefore be rectied

immediately.

• Any other use exceeds authorization. The manufactu-

rer is not responsible for any damages resulting from

un authorized use; risk is the sole responsibility of the

operator.

• The safety, work and maintenance instructions of the

manufacturer as well as the technical data given in

the calibrations and dimensions must be adhered to.

• Relevant accident prevention regulations and other,

gene rally recognized safety-technical rules must also

be adhered to.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach PL75 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scheppach PL75

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info