Bedienungsanleitung Scheppach PL75 (Seite 20 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch)

644549

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

20 GB

19. Trouble shooting

Problem Possible Cause Help

The motor does not run. Faulty motor, power supply cable or plug. Burned

out fuses.

Have the machine checked by skilled

personnel. Do not try to repair the machine

yourselves as it may be dangerous. Check

the fuses and replace them if necessary.

The motor starts slowly

and does not reach running

speed.

Low power supply voltage. Damaged windings.

Burned out capacitor.

Ask for the Electricity Board to check the

voltage available. Have the machine motor

checked by skilled personnel. Have the ca-

pacitor replaced by skilled personnel.

Excessive motor noise. Damaged windings. Faulty motor. Have the motor checked by skilled person-

nel.

The motor does not reach

full power.

Overloaded circuit due to lighting, utilities or other

motors.

Do not use other utilities or motors on the

circuit to which the plunge cut saw is con-

nected.

Motor overheats easily Overload of the motor; inadequate cooling of the

motor

Prevent overloading the motor when cutting;

remove dust from the motor to ensure an

optimum cooling of the motor

Decrease in cutting power

when sawing

The saw blade is too small (sharpened too often) Re-adjust the end stop of the saw unit

The saw cut is rough or

wavy

The saw blade is dull; the tooth shape is not

suited to the thickness of the material

Re-sharpen the saw blade or use an appro-

priate saw blade

The work piece rips or

splinters

The cutting pressure is excessive or the saw

blade is not suited to the application

Use the correct saw blade

REGULAR MAINTENANCE

The regular maintenance decribed above and in the

para graph below can be carried out by unskilled person-

nel.

• Do not oil the plunge cut saw, cause cutting must be

carried out in dry conditions; all rotating parts are self-

lubricating.

• During maintenance, wear protective gear if possible

(accident-prevention goggles and gloves).

• Remove cuttings when necessary both from the cut-

ting area, work surfaces and support bases.

Use of an aspirator or brush is recommended.

ATTENTION: Do not use compressed air jets!

Regularly check blade conditions: if difculties should

arise during cutting, have it sharpened by skilled per-

sonnel or replace it if necessary.

ASSISTENCE

When in need of skilled personnel for special mainte-

nance, or for repairs, both during and following the gu-

arantee pe riod, always apply to authorized centres for

assistance or directly to the manufacturer if there is no

authorized centre in your area.

Only a qualied electrician is permitted to connect the

machine and complete repairs on its electrical equip-

ment.

In the event of enquiries please specify the following da-

ta:

• Motor manufacturer

• Type of current of the motor

• Data recorded on the machine’s rating plate

• Data recorded on the switch’s rating plate

18. Maintenance

If specialist personnel must be brought in for extra-

ordinary ser vice or repairs during the warranty peri-

od and thereafter, please contact a service provider

recommended by us or con tact the manufacturer di-

rectly.

• Overhauls, maintenance work, cleaning, as well as the

eli mi nation of any malfunctions must only be underta-

ken af ter turning off the motor.

• All protective and safety equipment must be reins-

talled immediately upon completion of any repair or

maintenance work.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach PL75 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scheppach PL75

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info