Bedienungsanleitung Scheppach Plana 3.0 (Seite 12 von 128) (Alle Sprachen)

782085

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

english 11

sion and immission gages, it is not possible to determine

reliably, whether additional precautions are necessary

or not. Current factors of the work station affect the im-

mission gages, including the characteristics of the work

station, other sound sources, for example number of ma-

chines other adjacent operations. The permissible work

values can vary from country to country. However, the op-

erator should capacitate the information, in order to make

an estimate of the hazard and risk. Information on dust

emission In accordance with the policy of the Technical

Committee for Wood on dust emission checkup (concen-

tration parameter) of woodworking machines, dust emis-

sion values appropriate for wood are below 2 mg/3. As

a result, after connecting the machine to an operational

dust extraction outlet, with air speed of at least 20 m/s in

adherence to the lasting and reliable TRK-marginal values

for wood dust, effective in the Federal Republic of Ger-

many, it can be more.

In these operating instructions we‘ve marked the sections

that pertain to your safety with this sign: m

m General safety instructions

TRAINING OF THE OPERATOR

• Pass on the safety warnings to all people who will work

on the machine.

• The operator must be at least 18 years old. Appren-

tices must be at least 16 years old and can only work

on the machine under supervision.

• Persons operating the machine should not be distract-

ed.

• Keep children away from machines connected to the

power system.

• Wear well-ﬁtting clothes. Take off all jewelry, rings and

wristwatches.

• Follow all safety and danger warnings on the machine

and keep them in legible condition.

• Caution while working: risk of injury to ﬁngers and

hands by the rotating cutting tool.

STABILITY ASSURANCE

• During assembly, please make sure that the planing

machine stands ﬁrmly on solid ground.

m Utilization according to the regulations

• The planing machine is constructed exclusively from

offered tools and supplies for wood processing.

• The machine complies with the valid EG machine

guidelines.

• The machine is designed for one shift of work, pow-

erontimeS6–40%.

• Follow all safety and danger warnings on the machine.

• Keep all safety and danger warnings on the machine

complete and legible.

• When using in an enclosed space, the machine must

be attached to an extraction unit.

• To extract the wood shavings or sawdust, the machine

must be attached to an extraction unit. The velocity

of ﬂow of the connection piece of the extraction unit

must be 20 m/s. Negative pressure 1200 Pa.

• The automatic switch-on is available as optional equip-

ment.

Type ALV 2 Item Nr. 79104010 230 V /50 Hz

Type ALV 10 Item Nr. 79104020 400 V /230 V /50

• When switching on, the machine runs the extraction

automatically after 2-3 seconds delay time. Thus, an

• overload of the safety fuse will be prevented.

• After switching off, the machine runs the extraction for

• 3-4 more seconds and then shuts off automatically.

• The left over dust will be sucked out, as required by

the Ordinance on Hazardous Substances. This saves

electricity and reduces noise. The extraction unit runs

• only during the use of the machine.

• When operating in a commercial area, a deduster must

be employed during extraction. Do not disconnect or

remove the extraction unit or the deduster while the

machine is running.

• Use the machine only when it is in technically sound

conditions, as well as in compliance with the law, with

awareness of safety and danger according with the

operating instructions! Eliminate immediately all un-

necessary distraction that could compromise safety!

• The safety, operation and maintenance instructions of

the manufacturer, as well as the dimensions given in

the technical specs, must be observed.

• The applicable accident prevention regulations and

other technical safety rules of general knowledge must

be observed.

• The machine must be used, maintained or repaired

only by a competent person who can be trusted and is

informed of the dangers. The manufacturer will not be

responsible for damages resulting from arbitrary altera-

tions to the machine.

• The machine should only be used with the original

tools and supplies from the manufacturer.

• All use beyond the instructions counts as noncom-

pliance with the regulations. The manufacturer does

not carry any responsibility for damages resulting from

such use, the operator will bear all risks on his own.

Assembly

Due to technical reasons, your packed planing machine is

not fully assembled.

The planing machine shouldn‘t be lifted onto the work ta-

ble!

Setup and adjustment, Fig. 4

The machine stands on 4 adjustable rubber cushions.

Balance the unevenness of the ﬂoor. Loosen the lower

hexagon nut using the key and turn the rubber cushions

correspondingly in and out. Tighten the hexagon nut

again. (secure the hexagon nut) Attention! Be sure to align

the machine by using a level.

If the rubber cushions are displaced, the machine can be

bolted into the boreholes in the ﬂoor. For utilization with a

base frame, dismantle the rubber cushions and screw on

the frame.

Scheppach Plana 3.0 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info