781489
21
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
english 21
Fig. "A"
Fig. "B"
Fig. "F"
Fig. "G"
Mounting
All assembly and retrofitting work may only be performed when the
mains plug has been disconnected.
Your scheppach circular sawbench is not completely assembled for
packaging reasons.
Assembly tools
The following are included in the scope of delivery:
1 open-end spanner 19 mm width across flats
1 open-end spanner 30 mm width across flats
1 allen key 5 mm width across flats
1 allen key 6 mm width across flats
1 allen key 4 mm width across flats
Parallel fence Fig. "A"
Screw the fence section, in-between plate and guiding slide
together. For this purpose, insert the threaded bolts in the
guiding slide.
4 intermediate bushes
4 cheese head screws M 6 x 40
Fig. "B"
Attach the intermediate plate to the fence section.
- Do not tighten -
2 cheese head screws M 6 x 75
2 washers 6
2 wing nuts M 6
Parallel fence adjustment
Fig. "F"
• Open the extender lever on the sliding table (pull upwarts)
and put it condescendingly on the guide tube
For precise adjustment of the parallel fence in relation to the
circular saw blade, release the four cheese head screws (1),
and clamp the guide slide at a distance of approx. 100 mm
from the blade. Place a straight slat of approx. 600 mm length
against the blade. Align the fence parallel with the saw blade
by repeated measurement (X) and readjustment. Retighten the
cheese head screws (1)
Important!
For cutting widths below 120 mm always use a push stick.
Stop rail
Fig. "G"
Position 1:
For working with raised stop bar surface. The displayed cut
width is on the black display scale.
Position 2;
For working with lowered stop bar sur- face.
The displayed cut width is on the blue display scale. (Lower
stop bar surface symbol)
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Scheppach PRECISA 6.0 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info