19
• Remaining hazards can be minimized by
following the instructions in „Safety Precautions“,
„Proper Use“ and in the entire operating manual.
• Do not force the machine unnecessarily:
excessive cutting pressure may lead to rapid
deterioration of the blade and a decrease in
performance in terms of nish and cutting
precision.
• When cutting aluminium and plastics always
use the appropriate clamps: all workpieces must
be clamped down rmly.
• Avoid accidental starts: do not press the start
button while inserting the plug into the socket.
• Always use the tools recommended in this
manual to obtain the best results from your
plunge cut saw.
• Always keep hands away from the work area
when the machine is running; before performing
tasks of any kind release the main switch button
located on the handgrip, thus disconnecting the
machine.
Suitable use
To cut:
• Hard and soft, domestic and exotic wood
both longitudinally and transversally and with
appropriate adjustments (specic blade and
clamps); Unsuitable use
Do not cut:
• Ferrous materials, steel and cast iron or any
other material
not mentioned above and in particular foodstus.
Start-up
Observe the safety notes in the operating
instructions before operating the machine.
REMOVAL OF PACKAGING
Remove the box used to protect the machine
during transportion and keep it intact for future
transportation and storage.
ELECTRICAL CONNECTIONS
Check that the electrical system to which the
Proper use
CE tested machines meet all valid EC machine
guidelines as well as all relevent guidelines for
each machine.
• The machine must only be used in technically
perfect condition in accordance with its
designated use and the instructions set out in the
operating manual, and only by safety-conscious
persons who are fully aware of the risks involved
in oerating the machine. Any functional
disorders, especially those aecting the safety of
the machine, sholud terefore be rectied
immediately.
• Any other use exceeds authorization. The
manufacturer is not responsible for any damages
resulting from unauthorized use; risk is the sole
responsibility of the operator.
• The safety, work and maintenance instructions
of the manufacturer as well as the technical data
given in the calibrations and dimensions must be
adhered to.
• Relevant accident prevention regulations and
other, generally recognized safety-technical rules
must also be adhered to.
• The machine may only be used, maintained,
and operated by persons familiar with it and
instructed in its operation and procedures.
Arbitrary alterations to the machine release
the manufacturer from all responsibility for any
resulting damages.
• The machine may only be used with original
accessories and tools made by the manufacturer.
• The machine may not be operated with sanding
belts.
Remaining hazards
The machine has been built using modern
technology in accordance with recognized safety
rules. Some remaining hazards, however,
may still exist.
• The use of incorrect or damaged mains cables
can lead to injuries caused by electricity.
• Even when all safety measures are taken, some
remaining hazards which are not yet evident may
still be present.
