Bedienungsanleitung Scheppach RS400 (Seite 16 von 160) (Alle Sprachen)

781416

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

16 | GB

country, the technical rules generally accepted for the

operation of machines of the same type must be ob-

served.

We accept no liability for damage or accidents which

arise due to non-observance of these instructions

and the safety information.

2. Device description

1. Sifter drive, attached

2. Frame arm, right

3. Frame arm, left

4. Frame struts

5. Gusset plate with clamp

6. Gusset plates

7. Frame wall

8. Support feet

9. Wheel ø 160

10. sifter drum insert, grid 10 mm

3. Scope of delivery

• 1 piece Sifter drive, attached (1)

• 1 piece Frame arm, right (2)

• 1 piece Frame arm, left (3)

• 2 piece Frame struts (4)

• 1 piece Gusset plate with clamp (5)

• 3 piece Gusset plates (6)

• 1 piece Frame wall (7)

• 2 piece Support feet (8)

• 2 piece Wheels ø 160 (9)

• 1 piece sifter drum insert, grid 10 mm (10)

• 1 piece transport bow (11)

• Operating instructions

• 1 piece Accessory pack

- 2 piece spacer pins (a)

- 24 piece serrated lock washers ø8,2 (b)

- 22 piece hexagon nuts M8 (c)

- 1 piece hexagon bolt M10x70 (d)

- 3 piece small washer ø10 (e)

- 5 piece hexagon nut M10 (f)

- 14 piece hexagon bolt M8x65 (g)

- 8 piece washers ø8 (h)

- 4 piece hexagon bolt M8x45 (i)

- 2 piece cheese-head screw each M10x95 (j)

- 2 piece bush each (k)

- 2 piece hexagon bolt M8x70 (l)

4. Intended use

The roller sieve has been designed for sieving com-

post, gar den soil, cloddy sand, or mixing different

kinds of soil.

The equipment is allowed to be used only for its pre-

scribed purpose. Any other use is deemed to be a

case of misuse.

1. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment

and success.

Note:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by the

product that occurs due to:

• Improper handling

• Non-compliance of the operating instructions

• Repairs by third parties, not by authorized service

technicians

• Installation and replacement of non-original spare

parts

• Application other than specied

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113

We recommend:

Read through the complete text in the operating in-

structions before installing and commissioning the

device.

The operating instructions are intended to help the

user to become familiar with the machine and take

advantage of its application possibilities in accord-

ance with the recommendations.

The operating instructions contain important informa-

tion on how to operate the machine safely, profes-

sionally and economically, how to avoid danger, cost-

ly repairs, reduce downtimes and how to increase

reliability and service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regu-

lations that apply for the operation of the machine in

your country.

Keep the operating instructions package with the

machine at all times and store it in a plastic cover to

protect it from dirt and moisture. Read the instruction

manual each time before operating the machine and

carefully follow its information.

The machine can only be operated by persons who

were instructed concerning the operation of the ma-

chine and who are informed about the associated

dangers. The minimum age requirement must be

complied with.

In addition to the safety instructions contained in this

operating manual and the specic regulations of your

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach RS400 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scheppach RS400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info