Bedienungsanleitung Scheppach Structo 5 (Seite 8 von 54) (Deutsch, Englisch, Französisch, Italienisch, Polnisch, Finnisch)

782182

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

english 9

Manufacturer:

Scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear client,

We hope you will enjoy your new Scheppach construction

circular saw and wish you success with it.

The manufacturer of this tool is, according to the current

product liability law, not liable for damages caused to or

by this tool because of:

incorrect usage,•

failure to observe the manual,•

repairs by third parties, not authorized specialists, •

ﬁtting and exchange of non-original exchange parts,•

non-intended use,•

failure of the electrical installations because of inob-•

servance of the electrical Rules and VDE-Regulations

0100, DIN 57113/VDE0113.

We recommend that you:

Read the entire operating instructions before assembling and

implementing.

This instruction manual should make it easier for you

to get to know your machine and to use its range of ap-

plications as intended. The manual contains important

information on how to work with the machine in a secure,

correct and efﬁcient way, and how you can avoid risks,

save repair costs, reduce down time and increase the

reliability and life span of the machine. Apart from the

security rules mentioned in these operating instructions,

you should implicitly pay attention to the valid regula-

tions of your country for the use of the machine. Keep

the manual, in a plastic cover protected against dirt and

humidity, with the machine. They should be read and

observed carefully by every member of staff before start-

ing to work. Only people instructed on how to use the

machine and informed about the possible risks, should

be allowed to use it. The required minimum age is to be

adhered to. Besides the safety instructions in this manual

and the special regulations of your country the recognized

technical rules for the operation of wood processing ma-

chines need to be observed.

General instructions

After unpacking please check all parts for possible •

damage during transport. In case of complaints the

driver needs to be contacted as soon as possible.

Complaints coming in later will not be recognized as •

such.

Check if the consignment is complete. •

Familiarize yourself with the machine by means of the •

operating instructions before implementing it.

In case of replacing worn or exchange parts, as for ac-•

cessories, only use original Scheppach parts. You can

obtain exchange parts at the specialized dealer.

Upon ordering, please specify our article nºs as well as •

type and year of construction of the tool.

structo 5WE structo 5DR

Scope of delivery

Construction circular

saw

Construction circular

saw

Longitudinal end

stop

Longitudinal end

stop

Crosscut gauge Crosscut gauge

Saw blade Saw blade

Spline end Spline end

Push stick Push stick

Blade wrench Blade wrench

Rest key Rest key

Assembly

accessories

Assembly

accessories

Manual Manual

Technical information

Measurements

LxWxH mm 1075 x 790 x 1035 1075 x 790 x 1035

Table size mm 660 x 1000 660 x 1000

Saw blade ø mm 450 500

Cut height mm. 125 150

Rotation nº

1/min. 2800 2800

Weight kg 103 103

Power unit

Motor 230 V/50 Hz 400 V/50 Hz

Aufnahmeleistung

P1 kW 3,2 4,2

Abgabeleistung

P2 kW 2,6 3,3

Subject to technical changes!

Noise speciﬁc values

The according to the EN 23746 for the sound pressure

level resp. EN 31202 (correction factor k3 after sup-

plement A.2 from EN 31204 calculated) for the sound

pressure level on the working site ascertained noise emis-

sion value amounts under the foundations of ISO 7960

supplement A performed working conditions to:

structo 5WE/DR

Sound pressure level in dB

Idle state LWA = 103 dB(A),

Processing LWA = 108 dB(A)

There is a measurement insecurity allowance K=4dB for

the mentionned emission values.

In these operating instructions we have indicated positions

that concern your safety with this mark: 

 Safety instructions

Forward the safety instructions to all people working on •

or with this machine.

The machine is only to be used in technically faultless •

condition as well as according to its intended use, and

in a safety and risk conscious manner, and with ob-

servance of the operation instructions! Especially mal-

functions that can threaten safety have to be repaired

immediately.

Pay attention to all safety and risk instructions of the •

machine.

Keep all safety and risk instructions of the machine •

completely readable.

The circular saw should not be used to saw ﬁrewood. •

Be careful at work: Danger of damaging ﬁnger(s) and •

hand(s) by the rotating cutting tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach Structo 5 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info