Bedienungsanleitung Scheppach Trike S (Seite 10 von 48) (Deutsch, Englisch, Französisch, Italienisch, Polnisch)

781420

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

10 | GB

6. Transport wheels

7. Feeder brushes

8. Belt drive

9. Sweeping brushes

3. Scope of delivery

• Feeder brushes

• Sliding handle

• Lower push bar

• Mounting screw sliding handle

• Operation manual

• Enclosed accessories bag

• Flat round screw M8 x 25mm

• Fillister head screw (self-tapping) 4,2 x 15 mm

4. Intended use

• The machine is designed and built according to the

state-of-the-art and the safety-related standards.

Nevertheless, the use of the machine might involve

risks such as personal injury, danger to life for the

user or third parties, or damage to the machine and

other material property.

• The machine is to be used only in a technically

awless condition as well as in accordance with

the manufacturer’s instructions and in a safety and

risk-conscious manner while adhering to the oper-

ating instructions! In particular, failures which may

impair the safety must be resolved immediately (by

you or an expert)!

• Sweeping of at and dry surfaces – e.g. entries,

terraces, courtyards, etc.

• The machine may be operated only with original

parts and original accessories of the manufacturer.

• Any other use above or beyond this is considered

improper use. The manufacturer is not liable for

damages resulting from this. The user shall bear

this risk alone.

• The safety, work and maintenance instructions of

the manufacturer as well as the dimensions indicat-

ed in the Technical Data section must be adhered

to.

• The relevant accident prevention regulations and

other generally recognised safety standards must

be observed.

• The machine may be used, maintained or repaired

only by persons who are familiar with the machine

and the risks involved. Unauthorised modications

on the machine exclude any liability of the manu-

facturer for resulting damages.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial ap-

plications.

Our warranty will be voided if the equipment is used

in commercial, trade or industrial businesses or for

equivalent purposes.

1. Introduction

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

we hope your new tool brings you much enjoyment

and success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied.

We recommend:

Read through the complete text in the operating

instructions before installing and commission-

ing the device. If you give the equipment to any oth-

er person, give them these operating instructions as

well. The operating instructions are intended to help

the user to become familiar with the machine and

take advantage of its application possibilities in ac-

cordance with the recommendations. The operating

instructions contain important information on how to

operate the machine safely, professionally and eco-

nomically, how to avoid danger, costly repairs, re-

duce downtimes and how to increase reliability and

service life of the machine. In addition to the safety

regulations in the operating instructions, you have

to meet the applicable regulations that apply for the

operation of the machine in your country. Keep the

operating instructions package with the machine at

all times and store it in a plastic cover to protect it

from dirt and moisture. Read the instruction manual

each time before operating the machine and care-

fully follow its information. The machine can only be

operated by persons who were instructed concerning

the operation of the machine and who are informed

about the associated dangers. The minimum age re-

quirement must be complied with.

2. Device description

1. Handle

2. Sliding handle

3. Mounting screw sliding handle

4. Lower push bar

5. Dirt collecting container

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach Trike S Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info