Bedienungsanleitung Scheppach TS251 (Seite 23 von 40) (Deutsch, Englisch, Französisch)

782524

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Replacing the saw blade, ﬁg. 14.1-14.2

You must wear gloves when handling the saw bla-

de.

• Turn the height adjuster wheel (2) until the saw blade

has reached its highest position.

• Remove the protective hood (5).

• Remove the table insert (13).

• Lock the arbor with the saw blade key (G).

• Use the ﬂat spanner (H) to loosen the saw blade nut

(M) by turning it anti-clockwise (right-hand thread).

• Remove the outer ﬂange (K) and pull off the saw blade.

• Clean both ﬂanges carefully before attaching a new

saw blade.

• Attach and secure the saw blade in reverse order.

Warning: Be aware of the saw blade’s direction of ro-

tation. The cutting edge of the teeth must point in the

direction of travel, i.e. forwards (see the arrow on the

saw blade).

• Assemble the table insert again.

• Before working with the saw again, make sure that all

safety equipment is functional. Important: After as-

sembly, check by turning with your hand that the saw

blade rotates smoothly.

• Connect the saw blade to the power supply and leave

it in idle before starting to saw.

WARNING

There are no parts inside the power tool which can

be maintained by the user! Never open the power

tool! Take it to a qualiﬁed expert for further maintenance

work!

REPAIRS

Damage must exclusively be repaired by qualiﬁed tech-

nical staff.

WARNING

If the mains cable or the mains plug is damaged, it

has to be replaced by an electrician to prevent risks.

WARNING

After carrying out any cleaning and maintenance

work, make sure all safety equipment, if present, is

attached correctly and safely. Never use the power tool wit-

hout safety equipment!

Storage and Transport

STORAGE

1 Clean the power tool as described in section “Cleaning”.

2 Store the power tool and its accessories in a dark, dry,

frost-free and well-ventilated place out of the reach

of children. The ideal storage temperature is between

10 and 30°C.

3 Wrap the mains cable around the cable organiser on

the back of the power tool when you are not using it.

4 Cover the power tool to protect it from dust and hu-

midity.

5 Keep the operating manual with the power tool.

Storing the push stick and the mitre gauge, ﬁg. 15

When you are not using the mitre gauge and the push

stick, they can be stored on the side in the bracket.

AC motor

• The power voltage has to be 230 Volt – 50 Hz.

• Extension leads up to 25 m in length must have a

cross section of 1.5 mm2, at more than 25 m length,

it has to be at least 2.5 mm2.

• The mains connection is protected against short circuit

with a 16 A slow fuse.

Connections and repairs to the electrical equipment may

only be carried out by a trained electrician.

If there are any questions, please provide the following

data:

• Motor manufacturer

• Motor’s type of power

• Data from the machine’s type plate

When sending back the motor, always send the entire mo-

tor unit with switch.

Follow the safety notices!

Cleaning, Maintenance and Repair

WARNING

mBefore working on the power tool itself (e.g.

transport, set-up, retooling, cleaning and

maintenance), disconnect the mains plug from the

socket!

CLEANING

1 Always leave the power tool to cool down after use.

2 Clean the power tool after every use with a damp cloth

and some soap. Use a paint brush or a brush for areas

which are difﬁcult to access.

Note: Do not use aggressive cleaning agents or solvents.

They may affect the plastic and metal parts of the power

tool.

3 Regularly free the inside of the power tool from resi-

dual wood and chippings, such as the tooth segment

and gear of the revolving mechanism.

4 Remove possible saw dust blockages from the extrac-

tion port with a suitable blunt tool.

WARNING

Do not remove blockages with hands or ﬁngers!

5 Remove particularly persistent residual dust in in-

accessible places with compressed air (max. 3 bar).

MAINTENANCE

Before and after every use, check the power tool as well

as the accessories (e.g. tool attachments) for wear and

tear and damage. If required, replace them with new ac-

cessories as described in this operating manual. Comply

with technical requirements for this.

1 Check the saw blade regularly. Use well-sharpened,

ﬂawless and true saw blades only. Only use tools which

comply with the European Standard EN 847-1.

2 Immediately replace a worn-out table insert with a

new one of the same type.

3 Always keep the table’s surface free from resin.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach TS251 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info