Bedienungsanleitung Scheppach WDS 999 Kraft Werkzeuge (Seite 21 von 36) (Deutsch, Englisch, Französisch)

781891

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

21 І 36

8.4.Connection for dust extractor (g. 1, 5, 6)

m WARNING! Harmfull noxious gases may be gen-

erated when e.g. lead-containing paint is processed.

These gases entail a risk for the operator and the per-

sons in the vicinity! Therefore only use the power tool

in combination with a dust extraction unit, and protect

yourself and other persons in the working area with

additional suitable personal protective equipment!

When working with this power tool, a Iot of dust is

generated. The dust extraction unit is very useful if

you want to keep your workplace clean. lt is possible

to combine the extraction system or a vacuum cleaner

with the extraction hose (14) which is connected to

the adapter for dust extraction.

Insert the hose adaptor (15) into the connection for

dust extraction (10 or 12) and lock it by twisting as

shown in g. 5 and 6.

Note: Connect your tool to an extraction unit or vac-

uum cleaner. This will provide excellent extraction of

dust and debris.

m ATTENTION! For health safety reasons it is im-

perative that you use a dust extractor.

Note: Make sure that the vacuum cleaner is suitable

for being used together with a power tool.

8.5. Function of the brushed edge (g.7)

The grinding head of this power tool is enclosed by

a brush edge (A) which offers the following two ad-

vantages:

a) The brush edge (A) protrudes beyond the grind-

ing plate (1) and touches the surface to be pro-

cessed rst. Thus, the grinding plate is posi-

tioned in parallel to the working area before the

insertion tool comes in contact with the surface

which is to be processed. This is to prevent the

formation of sickle-shaped recesses caused by

the grinding disk edge.

b) Furthermore, the brush edge (A) prevents the

generation of excessive dust. Dust generated du

ring the grinding process is not transported to-

wards the outside but is removed by the extraction

system. Make sure before each operation with

this power tool that the brush edge (A) is not dam-

aged. Have it replaced if there is damage or wear.

8.6. Connection to the power supply

1. Make sure that the power tool is switched off.

2. Plug the power plug into a correctly installed

socket which complies with the requirements

specied in the technical data.

3. Your power tool is now ready for operation.

8.7. Switching on/off (g.8)

To switch on:

Push the on/ off switch (13)

Continuous operation: (g.8)

Secure the on/off switch (13) with the locking knob (6).

To switch off:

Press the on/off switch (13) briey and let go.

8.8. Adjusting the oscillation rate (g.9)

Before you start working, adjust the oscillation rate

according to the application. Use a low number of os-

cillations for rough grinding, increase the oscillation

rate for ne work.

• Rotate the adjustment wheel (5) to adjust the

oscillation rate. Turn the wheel clockwise to reduce

the oscillation rate (Fig.9).

• Turn the wheel counter-clockwise to increase the

oscillation rate (Fig. 9).

Note: The insertion tool moves for a short while after

having it switched off. Do not put aside the power tool

until the insertion tool has come to a complete halt.

8.9. Grinding

1. Attach an appropriate abrasive sheet (16) and

select the corresponding speed.

2. Hold the power tool securely at the handle sur-

faces (7, 2) and switch it on as described.

3. Wait until the insertion tool has reached its full

operating speed.

4. Hold the grinding plate (1) as parallelas possi-

ble to the wall, and touch the surface tobe pro-

cessed with the brush edge (A) rst.

5. Apply some pressure to the grinding head (1)

such that the insertion tool touches the surface

to be processed.

6. Constantly move the power tool over the surface.

Note: lf you want to avoid irregular grinding results,

do not keep the power tool at one spot for too long.

7. Lift the grinding plate (1) from the surface to be

processed before switching off the power tool.

8. Do not put aside the power tool until the insertion

tool has come to a complete halt.

8.10. After use

1. Switch off the power tool as described, discon-

nect it from the power supply and Iet it cool down.

2. Clean and maintain the power tool as described

under point 10, and store it carefully.

LED - light (g.10)

To ensure a well lit workplace, use the LED-light (4)

if necessary.

Press the switch (a) to switch ON/OFF the LED-light (4).

Ceiling grinding (g.11)

For working in ceiling area, x the grinding head with

a cotter pin (C) (included) as shown in gure 11.

9. Electrical connection

The electrical motor installed is connected and

ready for operation. The connection complies with

the applicable VDE and DIN provisions. The custom-

er‘s mains connection as well as the extension ca-

ble used must also comply with these regulations.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach WDS 999 Kraft Werkzeuge Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info