Bedienungsanleitung Scheppach Woova 4.0 (Seite 12 von 24) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

782128

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

english7

unit must not be allowed to use it.

• Followingtheaccidentpreventionandresafetyregula-

tions.

• Earth the PU hose on the connection port of the ma-

chine to which the extraction unit is connected to con-

ductawaythestaticelectriccharge(exposethecoilin

thehoseandmakeaconductiveconnection).

• Whenreplacingthelterorchipssack,wearadustpro-

tectionmask(ltermaskwithparticlelter,lterclass

2).

m Proper Use

The machine meets the currently valid EU machine directive.

• Themanufacturer’ssafety,operation andmaintenance

instructions as well as the technical data given in the

calibrations and dimensions must be adhered to.

• Relevantaccidentpreventionregulationsandothergen-

erally recognized safety and technical rules must also be

adhered to.

• Themachinemayonlybeused,maintainedorrepaired

by trained persons who are familiar with the machine

andhavebeeninformedaboutthedangers.Unauthor-

izedmodicationsofthemachineexcludealiabilityof

themanufacturerfordamagesresultingfromthemodi-

cations.

• Themachineisintendedforuseonlywithoriginalspare

partsandoriginaltoolsfromtheproducer.

• Any other use is considered to be not intended. The

manufacturer excludes any liability for resulting dam-

ages, the risk is exclusively borne by the user.

m Remaining hazards

The machine has been built using modern technology and

in accordance with recognized safety rules.

Some hazards, however, may still remain.

• Theuseofincorrectordamagedmainscablescanlead

to electrical injuries.

• Although having regarded all considerable rules there

may still remain not obvious remaining hazrds.

• Minimize remaining hazards by following the instruc-

tionsin”SafetyRules”,”Useonlyasauthorized”andin

theentireoperatingmanual.

Equipment, Fig. 1

1 Modular casing

2 Sidepartsleft/right

3 Floorplate

4 Wheels

5 Steering rollers

6 Filter holding arm

7 Filter

8 Filterholdingtape

9 Chipbag

10 Tension belt

11 Spiralhose

12 Accessory bag

13 Operatinginstructions

Assembly instructions

Wheel assembly

Boltsteeringrollersontooorplateusing3hexagonbolts

M6x10mmandnutsM6each.Boltwheelbracketsonto

oorplate.Fastenwheelaxlewithwheelsandwheelpins.

Puthubcapinplace.

Base assembly, Fig. 3

Bolt left and right side parts together using 3 hexagon

bolts M6 x 10 and nuts M6. Place them onto the oor

plateandboltthemtogetherwith4hexagonboltsM6x10

mm, and at the side with 4 countersunk screws M6 x 20

mm and nuts M6.

Casing assembly, Fig. 4

Place the modular casing onto the fully assembled base

and fasten it wih 4 hexagon socket screws M6 x 18 mm

and 6 screws recessed head 5 x 35 mm.

Filter holding arm, Fig. 5

Fixthelterholdingarmtothemodularcasing.

Filter assembly, Fig. 6 + 7

Pullthelterovertheconnectionpieceandfastenitwith

xingtape.

Tighten the worm drive screw using a slotted screw driver.

Insertthelterholdingarmintotheeyeofthelter.

Chip bag with tension belt, Fig. 8

Turnthechipbagfromtheinsideupsidedownbyapprox.

20mmandpullitovertheconnectionpieceofthecasing.

Then tighten the tension lock.

PU hose with wire hose clip, Fig. 9

Pushthesuctionhosewithhoseclipontothesuctioncon-

nectionpieceandtightentheclipwithascrewdriver.

Operation and maintenance

General:

The dust extractor unit has been designed for the extrac-

tionofdrydustandchipsofthedustclassesGandC(lter

C=accessory).

• Necessity of cleaning dictated by the amount of dust

(decreaseofsuctioncapacity).

• Replacechipbagsintime.

• Onlyuseoriginalchipbags.

• Fromtimetotime,checktheturningdirectionbycom-

paringthemotorcoolingfanintheslowingdownphase

with the direction arrow. A wrong direction of revolution

reducesthe suction capacityandwarmsup the motor

excessively. The direction of revolution may only be

changed by an authorized electrician.

Note:

Atleastonceamonth,aninstructedpersonmustexecute

a dust examination checking

• thelterforanydamage,

• thecasingandthesealsoflterandchipbagfortight-

ness, and

• theelectricalequipment(switchplugcombination,con-

nectingcable)forperfectcondition.

• Innowaymaydefectiveltersbeused.

Electric connection

Fig. 10-12

The electric motor has been installed ready for use. The

connection meets the German standards VDE and DIN.

The connection in the customer‘s workshop must also

meet these standards.

Installations,repairsandmaintenanceworksontheelec-

tric system may only be executed by an electrician.

Scheppach Woova 4.0 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info