Bedienungsanleitung Scheppach Wox 700 duo (Seite 16 von 48) (Deutsch, Englisch, Französisch)

781970

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

• The machine may be used, maintained or re-

paired only by experienced persons who are

assigned to do so and who are instructed re-

garding the dangers. Independent changes to

the machine exclude a liability of the manufac-

turer for resulting damages.

• The machine may be used only with original

scheppach accessories and original tools from

the manufacturer.

• Any use that goes beyond these terms is con-

sidered improper. The manufacturer is not li-

able for damages resulting from such use; the

user alone bears the risk thereof.

• The saw is designed exclusively for the cross-

cut sawing of rewood with max. 1m length

and min./max. Ø 60 – 250 mm.

• Only saw blades that adhere to the European

Norm EN 847-1 may be installed.

Description

The rocker circular saw is suitable only for the

sawing of rewood.

Unlike with a conventional rocker circular saw,

the placement of multiple logs in the rocker at

once is possible.

Its structural features are:

• Two parallel saw blades with a distance of

330mm. This technical feature enables an es-

pecially quick sawing of pieces of wood with

max. 1 m length.

• The hinged cover, which prevents the pieces

of wood from sliding out of the rocker and thus

represents an important component of the

safety equipment of the rocker circular saw

• The wood retaining lever for securing the

logs. One or more logs can be secured at the

same time with the wood retaining lever to pre-

vent grappling with the logs

• The tip ejection for fast and safe removal of

the logs from the rocker.

We recommend:

For a faster and more effective operation, we rec-

ommend that you use a rewood conveyor belt

from the scheppach product line.

For more information, see your scheppach deal-

er or www.scheppach.com

Residual risks

The machine is built according to the state of the

art and the recognised safety-technical rules.

Nevertheless, individual residual risks can arise

during operation.

• Injury danger for ngers and hands from the

rotating saw blade due to improper guiding of

the work piece.

• Danger to health from sawdust or wood chips.

• Do not lay crooked logs on the table careless-

ly; the wood must always be placed in the cut-

ting area of the table.

• It is imperative that you wear personal protec-

tive equipment like eye protection and dust

masks.

• Danger to health due to noise. During opera-

tion, the permissible noise level is exceeded. It

is imperative that you wear personal protective

equipment (hearing protection).

• Danger from current when using improper

electrical connection leads.

• Moreover, in spite of all preventative measures

being taken, unforeseeable residual risks can

still arise.

• Residual risks can be minimised if the “Safety

Notes” and “Intended Use” as well as the op-

erating instructions as a whole are observed

Assembly / Setup and adjustment

Your rewood rocker circular saw is already as-

sembled ready for use.

Pay attention, when you set up the rocker circular

saw, that it stands on a level base and avoid tip-

ping it.

Also make sure that your rocker circular saw

does not stand on a base that is too soft, to avoid

the machine sinking in.

Hauler attachment

• To cut rewood, attach the rocker circular saw

in the long direction to the 3-point hydraulics

of the hauler.

• Secure the drive shaft with the chain during

operation to prevent spinning.

• Suspend the drive shaft on the retaining brack-

et after the uncoupling from the hauler.

• When you leave the workplace, switch off the

hauler and remove the ignition key.

• Use the right drive shaft. We recommend the

scheppach drive shaft W100, Art. No. 0501

8101

Transport of the machine

Manual transport:

• When you transport the saw, lock the rocker

gate “A”. (Fig. 03)

• Use the transport device (Fig. 09) (available as

a separate accessory)

Transport with hauler

• During transport of the circular saw, the PTO

drive shaft operation must be switched off.

• The warning sign with tail lamp DIN 110030

must be mounted at the saw, and the tail light

must be connected to the hauler

Transport with crane (Fig. 12)

For transport with a crane, use the crane eye.

The crane eye is identied with an adhesive label

(Fig. 12).

Electrical connection

Fig. 01

• Connect the machine to the mains with the

CEE plug; the lead must be passively fused

with 16 A.

• Switch the saw on at the operating switch; the

saw shaft turns on. (First move the switch to

the star and wait briey until the motor has

reached full speed; then move the switch to

the triangle Fig. 01)

• During shutdown, the saw shaft is slowed

down within 10 s.

Changing the rotational direction Fig. 02

The installed electric motor is connected ready

for use. The connection meets the applicable

VDE and DIN requirements. The customer-side

mains connection as well as the extension cable

used must adhere to these regulations or the lo-

cal power company regulations.

Motor brake device

When the machine is switched off, an automati-

cally operating brake with brake board (excep-

tion: 6.1 kw motor with mechanical brake) slows

it down safely. The brake stops the drive motor of

the saw shaft within 10 s.

If the braking process takes longer than 10 s,

the machine may no longer be used because

the brakes are defective. It is imperative that you

separate the machine from the power supply.

Only a qualied electrician may be assigned

to resolve the problem.

Operating mode / Switched-on time

The electric motor is designed for operating

mode S6–40%. This abbreviation stands for:

S6: continuous operation with intermittent load

40%: (based on 10 min.) 4min. load; 6 min. idling.

If the motor is overloaded, it switches off auto-

matically, since a winding thermostat is embed-

ded in the motor winding. After a cooling period

(duration varies), the motor can be switched on

again.

Damaged electric power cables

Insulation damage often occurs to electric power

cables.

DGB

Scheppach Wox 700 duo Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info