Bedienungsanleitung Scheppach WOX Z 700SL (Seite 33 von 48) (Deutsch, Englisch, Französisch)

781987

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Seite:33

Intended use m

• The ﬁrewood circular saw and the supplied tool is exclusively constructed for the processing of wood.

• The machine complies with the valid EG Machines regulation

• The machine has only been constructed for one-shift operation. Duty cycle S 6 - 40%.

• The saw is exclusively constructed for transverse cutting of ﬁrewood of max. 1 m length.

• Independent of the wood diameter only one piece may be laid onto the rocker.

• Take notice of all safety and risk information of the machine.

• Keep all safety and risk information of the machine completely in readable condition.

• Upon usage in closed rooms the machine should be connected to an exhaust installation.

• Use the machine only in technical impeccable condition as well as according to its intended use, and in a safety -

and danger conscious manner with observance of the operational constructions! Immediately eliminate, or have

eliminated, in particular those disorders that can harm safety!

• The safety, work and maintenance regulations of the producer as well as the measurments mentioned in the

“Technical information“ must be abided by.

• Attention must be paid to the applicable prevention of accidents rules and to the other, generally accepted safety-

related rules.

• The machine should only be used, maintained or repaired by people who are familiar with it and informed about the

risks. Arbitrary changes to the machine exclude liability of the manufacturer.

• The machine should only be used with original accessories, original extension tools and original saw blades of the

manufacturer.

• Every use surpassing this counts as non-intended use. In this case the manufacturer is not liable for damages

caused; therefore the user only bears the consequences.

Other risks m

The machine is built according to the up to date technical level and the accepted safety-related rules. However, some

remaining risks might occur during work.

•Risk of injury for ﬁngers and hands by the rotating saw blade in case of incorrect usage of the workpiece.

•Risk of health because of wood dust or wood splinters. Wear personal protection gear such as eye protection and dusk

mask without fail.

• Risk of health because of noise. During operation the allowable noise level is exceeded.

•Electricity danger, in case electrical connections not according to the rules are used.

•Furthermore, despite of all precautions unapparent remaining risks can exist.

•Remaining risks can be minimized, when the “Safety information” and the ”Intended use” as well as the operational

instructions altogether are respected.

Attention: risk of accident!

The wood must always be seated on both sides of the saw blade on the v-block of the rocker. (see arrows)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach WOX Z 700SL Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info