Bedienungsanleitung Scholtes LVX 12-56 (Seite 19 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

456522

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Wash options*

Half load using the upper or lower rack*

If you only have a few dishes to wash, you can load these onto

one rack only, saving on both water and electricity. Press button

HALF LOAD, a beep will sound and the symbol corresponding

to the HALF LOAD appears on the display. Each time you

press the button, a beep will sound and symbol corresponding

to the upper rack or symbol corresponding to the lower rack

will appear. If you press the button once more, the selection will

be reset and the dishwasher will consequently wash on both

racks. To use the racks correctly, we recommend you read the

chapter entitled "Loading the racks".

Remember to load the selected rack only, and to reduce

the amount of detergent accordingly.

It is better to use powder detergent in this case.

How to programme extra drying

If you want your dishes to be perfectly dry, follow the

instructions below.

Set the knob to RESET and make any specific settings, such

as:

- upper or lower rack

- delayed start

Start the wash cycle by turning the knob and open the

appliance door. Observe symbol for drying: it will flash for

about 4 seconds, while the word "OFF" appears on the display

(extra drying disabled).

If you press button HALF LOAD immediately, you will hear a

prolonged beep and the word "ON" will appear on the display:

the extra drying has been enabled.

Once you have made your selection, shut the appliance door;

a beep will sound and the wash cycle will either start

immediately or after the delay, wherever set.

Remember that with extra drying, the wash cycle will last

longer, to provide you with drier dishes.

* Only available in selected models.

Delayed start

Press button Delayed Start and you can delay the start of the

wash cycle by 24 to 1 hour. Press the button once, a beep will

sound and the wording 24 h will come up on the display. Then,

each time you press the button a beep will sound and the hours

will decrease by one hour until the delay is 01 h. If you press the

button once again, the delayed start is reset and 3 dashes appear

on the display.

Note: the delayed start is also reset automatically should

you fail to select the wash cycle on knob wash cycle selector

within 15 seconds.

Once you have set the delayed start time, select the wash cycle

on the knob: after the beep sounds, you will see Delayed Start

indicator light flash on the display and the countdown begins

(indicated on the display one hour at a time). A quick look at the

indicator lights will keep you informed of the countdown progress

at all times.

Have you changed your mind?

During the countdown, you can modify the delay by

pressing button DELAYED START repeatedly without

resetting the wash cycle.

If you have changed your mind and wish to start the

wash cycle immediately, press button Delayed Start until

the countdown is fully reset. Indicator light Delayed Start

will turn off and the cycle will start at the sound of a

beep.

The indicator light corresponding to the cycle phase under

way will come up on the display and the countdown to the

estimated cycle end begins.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scholtes LVX 12-56 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info