Bedienungsanleitung Scholtes til 642 (Seite 23 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

332166

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

SUITABLE

UNSUITABLE

Cast iron

Enamelled steel

Special stainless steel

Copper,

Aluminium, Glass, Earthenware,

Ceramic, non magnetic Stainless steel

Practical advice on using the appliance

! Use cookware made from materials that are

compatible with the induction principle

(ferromagnetic material). We especially recommend

pans made from: cast iron, coated steel or special

stainless steel adapted for induction. Use a magnet

to test the compatibility of the cookware.

In addition, to obtain the best results from your hob:

 Use pans with a thick, flat base to fully utilise the

cooking zone.

 Always use pans with a diameter that is large

enough to cover the hotplate fully, in order to use

all the available heat.

 Make sure that the base of the cookware is

always dry and clean, to fully utilise and extend

the life of both the cooking zones and cookware.

 Avoid using the same cookware that has been

used on gas burners: the heat concentration on

gas burners may distort the base of the pan,

causing it not to adhere correctly.

Safety devices

Pan sensor

Each cooking zone is equipped with a pan sensor

device. The hotplate only emits heat when a pan

with suitable measurements for the cooking zone is

placed on it.

If the indicator light is flashing, it may indicate:

 An incompatible pan

 A pan whose diameter is too small

 The pan has been removed from the hotplate.

Residual heat indicators

After the pan has been removed from one of the

cooking zones, part of the power level indicator will

flash while the temperature of that particular zone

remains above 60°C. This reduces the risk of burns

and scalds.

Overheating protection

If the electronic components overheat, the hob

switches off automatically and the power level

indicator will show the two external parts or the two

internal and the two external parts as active. When

the temperature has reached a more appropriate

level, this message disappears and the hob may be

used again.

Safety switch

The appliance has a safety switch that automatically

switches off the cooking zones when they have been

in operation for a certain amount of time at a given

power level. When the safety switch has been

triggered, the display shows 0.

For example: the right rear hotplate is set to 5 and

will switch off after 3 hours of continuous operation,

while the front left hotplate is set to 2 and will switch

off after 10 hours.

Buzzer

Can also indicate several irregularities:

 An object (a pan, cutlery, etc.) has been placed

on the control panel for more than 10 seconds.

 Something has been spilt on the control panel.

 A button has been pressed for too long.

All of the above situations may cause the buzzer

to sound. Remove the cause of the malfunction to

stop the buzzer. The control panel locks

automatically in the above situations. To unlock it

press the [key icon] button, the settings will have

been maintained. If the cause of the problem is

not removed, the buzzer will keep sounding and

the hob will switch off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scholtes til 642 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info