Bedienungsanleitung Scholtes tmg 7040 (Seite 16 von 50) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

331264

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Technical characteristics

Warning: If the hob is fitted above a built-in oven, the hob

and the oven must be connected to the mains separately for

safety reasons and to simplify operations when it is necessary

to pull the oven out for some reason.

Electrical connection

• The electrical safety of this appliance can only be

guaranteed if the latter is correctly and efficiently

earthed, in compliance with regulations on electrical

safety. Always ensure that this vital safety measure has

been taken. If you have any doubts, call in a qualified

technician to check the electrical system thoroughly.

• The manufacturer denies all responsibility for dam-

age resulting from a system which has not been

earthed correctly.

• Before powering the appliance, check whether the

technical characteristics featured on the appliance data

plate correspond with those of the mains electrical sys-

tem.

• Check that the current load of the mains supply and

of the power sockets is suitable for the maximum power

of the appliance, indicated on the appliance data plate.

If in doubt, contact a qualified professional.

Disconnect the appliance from the electricity supply

before all operations.

You may connect your hob to the electrical system in two

different ways:

• by means of a junction box: if the appliance is

connected permanently to the mains, an omnipolar

circuit breaker, accessible if necessary, with a mini-

mum contact opening of 3 mm should be installed.

• by means of a socket conforming to the regulations

in force in the country where the appliance is fitted. It

should be accessible whenever necessary; do not use

adaptors, multiple plugs or extensions.

Important

After connecting the appliance to the flexible cable, tighten

all the screws on the terminal board. Make sure jumpers

are installed according to the type of mains system as

indicated in the table.

For example: line 1 in the table

In the event of an incorrect connection:

• if your appliance does not work,

• check the position of the wires in the terminal board,

• check that all screws are tight,

• check the positioning of the jumpers.

Phase

(brown)

Jumper Neutral

(blue)

Earth

(green/yellow)

Electrical connections

Voltage,

Frequency

Fuses,

Sections

FR-AT-BE-DE-GP--

ES-IE-IL-IS-IT-LU-

RE-FI-GB-GR-PT--

SE-MA-NZ

230V-1+N~50 Hz

25 A*

2,5 mm²

FR-BE-NO

230V-2~50/60 Hz

25 A*

2,5 mm²

FR-BE- CH-DE-AT--

ES-IL-IT-NZ-PT-

MA- LU-SE-IS-NL

400V2-N~50 Hz

16 A*

1,5 mm²

FR-BE-NO

230V3~50 Hz

16 A*

1,5 mm²

230V2+2-N~50 Hz

16 A*

1,5 mm²

CY-AU-NZ-KW-MT

240V-1+N~50 Hz

25 A*

2,5 mm²

* Application of the simultaneity coefficient in accordance with

cei 60335-2-6 norm

12345

L1 L2

12345

L1 L2 N

12345

L1 L2 L3

12345

L1 L2 N2N1

12 34

12345

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scholtes tmg 7040 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info