Bedienungsanleitung Scholtes tt 6054 (Seite 20 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

331268

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Programming the cooking time

! All the cooking zones may be programmed for a

length of time between 1 and 99 minutes.

1. Switch the hotplate on and set the temperature.

2. Press the button repeatedly until the light

corresponding to the plate you wish to use illuminates.

3. Set the cooking time using the

and

buttons.

4. Confirm by pressing the

button.

The timer begins counting down immediately. When

the set programme has finished, a buzzer sounds for

about 10 seconds and the cooking zone switches off.

Repeat the above procedure for each hotplate you

wish to programme.

Using multiple programmes and the display

If one or more plates are programmed, the display will

show the data for the plate with the least time

remaining, and the light corresponding to the position

of the plate will be switched on. The lights

corresponding to the other plates programmed will

flash.

To display the time remaining for the other

programmed plates, press the

button repeatedly.

The times remaining for each plate will be shown in a

clockwise order, beginning with the front left plate.

Changing the programme

1. Press the

button repeatedly until the time you

wish to change is shown.

2. Use the

buttons to set the new time.

3. Confirm by pressing the

button.

To cancel a programme, follow the above points.

When it comes to point 2, press the

buttons

simultaneously. The setting will return to zero and the

display will no longer be operating in the programme

set function.

Control panel lock

When the hob is switched on, it is possible to lock the

oven controls to avoid accidental changes to the

settings (by children, during cleaning, etc.). Press the

button to lock the control panel: the indicator light

above the button will switch on.

To use any of the controls (e.g. to stop cooking), you

must switch off this function. Press the

button for a

few moments, the indicator light will switch off and the

lock function will be removed.

Switching off the hob

Press the

button to switch the appliance off.

If the control panel lock is on, the controls will

continue to be locked even after the hob is switched

on again. In order to switch the hob on again, you

must first remove the lock function.

Demo mode

It is possible to set the hob to a demonstration mode

where all the controls work normally but the heating

elements do not switch on. To activate the demo

mode the hob must be switched on, with the control

panel lock activated.

 Press the

button for the rear left plate, the

button for the front right plate and the button

simultaneously and hold them for three seconds.

 The display will alternate between DE and MO and

the hob will be switched off.

 When the hob is switched on again it will be set to

the demo mode.

To cancel this function:

 When the hob is switched on and the control panel

lock is on, press the buttons as instructed above.

 The display will alternate between RE and AL and

the hob will be switched off.

 When it is next switched on, the hob will function

normally.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scholtes tt 6054 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scholtes tt 6054

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info