Bedienungsanleitung Schwinn 202 Upright Bike (Seite 12 von 29) (Englisch)

671385

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

OPERATION

HOW TO USE THE 102/202 BIKE

 Seat adjustment

Proper seat adjustment helps ensure maximum exercise efficiency and comfort, while reducing the

risk of injury.

1. Place one pedal in the forward position and center the ball of your foot over the center of the

pedal. Your leg should be slightly bent at the knee.

2. If your leg is too straight or your foot cannot touch the pedal, you will need to move the seat down

on the 102 or forward on the 202 bike. If your leg is bent too much, you will need to move the

seat up on the 102 or backward on the 202 bike.

3. Adjust the 102 seat by first dismounting the bike, then pulling out the adjustment knob on the seat

tube and releasing the locking pin. Lower or raise the seat to the desired height. Release the seat

knob, engaging the locking pin. Be sure that the pin is fully secured in a seat post hole.

To adjust the 202 seat, pull the seat knob up with your right hand to release the seat. Slide the

seat forward or backward to the desired position. The knob will “pop” up into the next hole; turn

the knob to ensure a tight fit.

4. The 102 also features a fore / aft adjustment. To move the seat closer to, or away from the

console, loosen the knob, slide the seat forward or rearward to the desired position and re-tighten.

 Foot positioning/pedal strap adjustment

Place the ball of each foot on the pedals. Rotate the pedals until one foot is within arms reach. Then,

reach down carefully and fasten the rubber strap over your shoe and secure it to the pedal by slipping

the nub at the end of the pedal through one of the slots in the strap. Pull down on the strap until

it snaps into place. Repeat for the other foot. Point your toes and knees directly forward to ensure

maximum pedal efficiency. Pedal straps can be left in place for subsequent workouts.

 Handlebar Adjustment

The 102 offers an adjustable handlebar to ensure a variety of comfortable hand positions. To adjust the

angle of the handlebars, loosen knob, adjust the handlebars to the desired position and re-tighten.

 Resistance adjustment

Using the console, you have control over the levels of resistance integrated into your workout.

Typically, lower resistance levels enable you to move at a faster pace, placing increased demand on

your cardiovascular system. Higher resistance levels will typically deliver more of a muscle/ endurance

workout at lower RPMs. But everyone is different! So experiment and find the beginning of resistance

that is comfortable for you.

 Lower body workout

Once you are in position and sitting comfortably, slowly begin pedaling, with your arms relaxed at your

sides and with your hands resting on the top of your thighs or on the hand grips. Pedal at an easy

pace, at a low resistance level until you feel secure and comfortable. As you feel more comfortable,

experiment with the range of resistance levels available via the console.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schwinn 202 Upright Bike Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info