Bedienungsanleitung Schwinn 230i - 2016 (Seite 38 von 40) (Englisch)

737264

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

TROUBLESHOOTING

Condition/Problem Things to Check Solution

No display/partial display/

unit will not turn on

Check electrical (wall)

outlet

Make sure unit is plugged into a functioning wall outlet.

Check connection at front

of unit

Connection should be secure and undamaged. Replace

adapter or connection at unit if either are damaged.

Check data cable integrity All wires in cable should be intact. If any are visibly crimped or

cut, replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Check console display for

damage

Check for visual sign that console display is cracked or other-

wise damaged. Replace Console if damaged.

Console Display If Console only has partial display and all connections are ne,

replace the Console.

If the above steps do not resolve the problem, contact your lo-

cal distributor for further assistance.

Unit operates but Contact

HR not displayed

HR cable connection at

Console

Be sure cable is connected securely to Console.

HR cable box connection Be sure cables from handlebars and cable to Console are

secure and undamaged.

Sensor grip Be sure hands are centered on HR sensors. Hands must be

kept still with relatively equal pressure applied to each side.

Dry or calloused hands Sensors may have difculty with dried out or calloused hands.

A conductive electrode cream (heart rate cream) can help

make better conduct. These are available on the web or at

medical or some larger tness stores.

Static Handlebar If tests reveal no other issues, Static Handlebar should be

replaced.

Console displays “E2” er-

ror code

Check data cable integrity All wires in cable should be intact. If any are cut or crimped,

replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Console Electronics If tests reveal no other issues, contact your local distributor for

further assistance.

No speed/RPM reading,

Console displays “Please

Pedal” error code

Check data cable integrity All wires in cable should be intact. If any are cut or crimped,

replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Check magnet position

(requires shroud removal)

Magnet should be in place on pulley.

Check Speed Sensor

(requires shroud removal)

Speed sensor should be aligned with magnet and connected to

data cable. Realign sensor if necessary. Replace if there is any

damage to the sensor or the connecting wire.

Resistance does not

change (machine turns on

and operates)

Batteries (if equipped) Replace batteries and check for proper operation.

Check Console Check for visual sign that Console is damaged. Replace Con-

sole if damaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schwinn 230i - 2016 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Schwinn 230i - 2016

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info