Bedienungsanleitung Schwinn 510T (Seite 7 von 48) (Englisch)

737898

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Grounding Instructions (for a 120V AC system )

This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for

electriccurrenttoreducetheriskofelectricshock.Thisproductisequippedwithacordhavinganequipment-grounding

conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and

grounded in accordance with all local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock.

Check with a qualied electrician or serviceman if you are in doubt as to whether the product is

properly grounded. Do not modify the plug provided with the product – if it will not t the outlet,

have a proper outlet installed by a qualied electrician.

If you connect the machine to an outlet with GFI (ground fault interrupt) or AFI (arc fault interrupt), machine operation can

cause the circuit to trip. This machine is for use on a nominal 120-V circuit, and has a grounding plug that looks like the

plug illustrated below. A temporary adapter that looks like the adapter illustrated may be used to connect this plug to a

2-pole receptacle as shown if a properly grounded outlet is not available.

Thetemporaryadaptershouldbeusedonlyuntilaproperlygroundedoutletcanbeinstalledbyaqualiedelectrician.

Thetabforthegroundingscrewmustbeconnectedtoapermanentgroundsuchasaproperlygroundedoutletboxcover.

Whenever the adapter is used, it must be held in place by a metal screw.

Metal Screw

Tab for

Grounding

Screw

Adapter

Grounded

OutletBox

Grounded

Outlet

Grounding Pin

Earthing Instructions (for a 220-240V AC system )

This product must be electrically earthed. If a malfunction occurs, correct earthing decreases the risk of electric shock.

Thepowercordisequippedwithanequipment-earthingconductor,andmustbeconnectedtoanoutletthatisproperly

installed and earthed.

The electrical wiring must comply with all applicable local and provincial standards and

requirements. Incorrect connection of the equipment-earthing conductor can result in a risk of

electric shock. Consult a licensed electrician if you are not sure that the machine is correctly

earthed. Do not change the plug on the machine – if it does not t the outlet, have a correct outlet

installed by a licensed electrician.

If you connect the machine to an outlet with RCBO (Residual-Current circuit Breaker with Overload protection), machine

operation can cause the circuit to trip. A Surge Protector Device is recommended to protect the machine.

If a Surge Protector Device (SPD) is used with this machine, be sure that it matches the power rating of this

equipment (220-240V AC). Do not connect other appliances or devices to the surge protector in combination

with this machine.

Make sure that the product is connected to an outlet having the same conguration as the plug. Use the

appropriate adapter supplied with this product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schwinn 510T Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Schwinn 510T

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info