Bedienungsanleitung Schwinn 570T (Seite 37 von 54) (Englisch)

737322

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

The default is “VALUE - ON” for all workout values. When done with modifying which workout values are displayed,

push the OK button to set the Console.

10. The Console display shows the WIRELESS HR prompt. If you are using the Console speakers at their higher settings

and / or using a larger sized personal electronic device, the Console may show Heart Rate interference. This option

allows the Telemetry Heart Rate Receiver to be deactivated blocking the interference.

The Console Display shows the current value setting: “ON” or “OFF”. Push the Increase() or Decrease() buttons to

change the value. The default is “ON”.

Push the OK button to set the Telemetry Heart Rate Receiver to active.

11. The Console will go to the Power-Up Mode screen with the user selected.

Reset a User Profile

1. From the Power-Up Mode screen, push theUserbuttontoselectoneoftheUserProles.

2. Push the OK button to select the User Profile.

3. The Console display shows the GOAL TRACK prompt. Push the Decrease () button to change the prompt.

Note: ToexittheUserProleoptions,pushthePAUSE/STOPbuttonandthe

console will go back to the Power-Up Mode screen.

4. The Console display shows the RESET prompt and the current User Profile name.

Push OK to start the Reset User Proleoption.

5. The Console will now confirm the request to reset the User profile (the default

selection is ‘RESET - NO’). Push the Increase() or Decrease() buttons to adjust

the selection.

6. Push OK to make your selection.

7. The Console will go to the Power-Up Mode screen.

Changing Incline Levels

Push the Incline Level Increase() or Decrease() buttons to change the incline angle

of the Deck at any time with the Safety Key installed. To rapidly change the incline level

push the desired Pre-Set Incline Button, and then the Incline Enter Button. The Deck will

adjust to the selected incline level.

Note: After a Pre-Set Incline Button is pushed, the Incline Enter Button must be

pushed within 12 seconds.

Be sure the area below the machine is clear before lowering the Deck. Fully lower the Deck after each

workout.

Exercise on this machine requires coordination and balance. Be sure to anticipate that changes in belt

speed and incline angle of deck can occur during workouts, and be attentive in order to avoid loss of

balance and possible injury.

Be sure that the workout space you are utilizing has adequate height clearance, taking into consideration the height

oftheuserandthemaximumheightofthefullyinclinedDeck.

Changing Speed Levels

Push the Speed Level Increase() or Decrease() buttons to change the Belt Speed at any time in a workout program.

To rapidly change the Speed level push the desired Pre-Set Speed Button, and then the Speed Enter Button. The Walking

Belt will adjust to the desired speed.

Note: After a Pre-Set Speed Button is pushed, the Speed Enter Button must be pushed within 12 seconds.

INCLINE SPEED

km/hmph

SPEED

INCLINE

0-15%

19.3

16.0

12.8

9.6

8.0

6.4

3.2

www.schwinnconnect.com

Fitness Score

Pre-Set Incline

Buttons

Incline

Enter

Button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schwinn 570T Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Schwinn 570T

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info