Bedienungsanleitung Schwinn 830 (Seite 7 von 50) (Englisch)

737323

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Emergency Stop Procedure

The Treadmill machine is equipped with a Safety Key that can prevent serious injury, as well as prevent children from

playing with and/or being injured on the machine. If the Safety Key is not correctly inserted into the Safety Key Port, the

belt will not operate.

!Always attach the Safety Key Clip to your clothing during your workout.

When you use the machine, only remove the Safety Key in an emergency. When the key is removed while

the machine is in operation, it will stop quickly, which could cause the loss of balance and possible injury.

For safe storage of the machine, and to prevent unsupervised operation of the machine, always remove

the Safety Key and disconnect the power cord from the wall outlet and the AC input. Place the power cord

in a secure location.

The Console will display “ + SAFETY KEY ”, or add Safety Key, for a Safety Key fault. The Treadmill machine will not start

a Workout, or will end and clear an active Workout, when the Safety Key is removed. Inspect the Safety Key and be sure

it is connected to the Console correctly.

Earthing Instructions

This product must be earthed. If it should malfunction or break down, earthing provides a path of least resistance for

electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-earthing

conductor and an earthing plug. The plug must be plugged into an appropriate outlet that is properly installed and earthed

in accordance with all local codes and ordinances.

Improper connection of the equipment-earthing conductor can result in a risk of electric shock.

Check with a qualied electrician or serviceman if you are in doubt as to whether the product is

properly earthed. Do not modify the plug provided with the product – if it will not t the outlet,

have a proper outlet installed by a qualied electrician.

If you connect the machine to an outlet with RCD (residual-current device), GFI (ground fault interrupt) or AFI (arc fault

interrupt), machine operation can cause the circuit to trip. This machine is for use on a nominal 120-V circuit, and has a

earthing plug that looks like the plug illustrated below. A temporary adapter that looks like the adapter illustrated may be

used to connect this plug to a 2-pole receptacle as shown if a properly earthed outlet is not available.

Thetemporaryadaptershouldbeusedonlyuntilaproperlyearthedoutletcanbeinstalledbyaqualiedelectrician.

Thetabfortheearthingscrewmustbeconnectedtoapermanentearthsuchasaproperlyearthedoutletboxcover.

Whenever the adapter is used, it must be held in place by a metal screw.

Metal Screw

Tab for

Earthing

Screw

Adapter

Earthed

OutletBox

Earthed

Outlet

Earthing Pin

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schwinn 830 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info