Bedienungsanleitung Schwinn 870 (Seite 50 von 54) (Englisch)

737325

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

TROUBLESHOOTING

Condition/Problem Things to Check Solution

No display/partial display/

unit will not turn on

Check electrical (wall)

outlet

Make sure unit is plugged into a functioning wall outlet. Test the

outlet with a known functioning device such as a lamp.

Check connection at front

of unit

Connection should be secure and undamaged. Replace power

cord or connection at unit if either are damaged.

Check data cable integrity All wires in cable should be intact. If any are visibly crimped or

cut, replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly. Small

latch on connector should line up and snap into place.

Check console display for

damage

Check for visual sign that console display is cracked or otherwise

damaged. Replace Console if damaged.

Console Display If Console only has partial display and all connections are ﬁne,

replace the Console.

If the above steps do not resolve the problem, contact Customer

Care for further assistance.

Unit operates but Contact

HR not displayed

Sensor grip Be sure hands are centered on HR sensors. Hands must be kept

still with relatively equal pressure applied to each side.

Dry or calloused hands Sensors may have difﬁculty with dried out or calloused hands.

A conductive electrode cream (heart rate cream) can help make

better conduct. These are available on the web or at medical or

some larger ﬁtness stores.

If tests reveal no other issues, contact Customer Care for further

assistance.

Unit operates but Telemet-

ric HR not displayed

Chest Strap Strap should be “POLAR

” compatible and uncoded. Make sure

strap is directly against skin and contact area is wet. Make sure

the transmitter has the curve oriented upward.

Check User Proﬁle Select the Edit User Proﬁle option for the User Proﬁle. Go to the

WIRELESS HR setting and make sure that the current value is

set to ON.

Interference Try moving unit away from sources of interference (TV, Micro-

wave, etc).

Replace Chest Strap If interference is eliminated and HR does not function, replace

strap.

Replace Console If HR still does not function, contact Customer Care for further

assistance.

Speed display is not ac-

curate

Display set to wrong unit of

measure. (English/Metric)

Change display to show correct units.

Console shuts off (enters

sleep mode) while in use

Check electrical (wall)

outlet

Make sure unit is plugged into a functioning wall outlet. Test the

outlet with a known functioning device such as a lamp.

Check connection at front

of unit

Connection should be secure and undamaged. Replace power

cord or connection at unit if either are damaged.

Check data cable integrity All wires in the cable should be intact. If any are cut or crimped,

replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly. Small

latch on connector should line up and snap into place.

Reset machine Unplug unit from electrical outlet for 3 minutes. Reconnect to

outlet.

If the above steps do not resolve the problem, contact Customer

Care for further assistance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schwinn 870 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info